Application Search

GC
Samples: Chloroform , Fenitrothion , Fluoranthene
Applications: Analysis of fenitrothion using Shinwasorb
Column: Polyphenyl Ether (5 rings) 1.5% Shinwasorb-S 100/120
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 195℃
Carrier gas: 55 mL/min N₂
Injection port temp.: 230℃
Detector temp.: 230℃
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Carbonyl sulfide , Hydrogen sulfide , Carbon disulfide , Methyl mercaptan , Ethyl mercaptan , Dimethyl sulfide , Dimethyl disulfide
Applications: Analysis of methyl mercaptan, hydrogen sulfide, dimethyl sulfide, and dimethyl disulfide using Shinwasorb
Column: β,β’-Oxydipropionitrile 12.5% Shinwasorb-S 60/80 ST
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 70℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 180℃
Detector temp.: 180℃
Detector: FPD (S)
Injection volume: 1.0 μL

View detail

GC
Samples: Trimethylamine , Dimethylamine , Methylamine
Applications: Analysis of methylamines using Shinwasorb
Column: Diglycerol+TEP+KOH 7.5+7.5+1% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 70℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 220℃
Detector temp.: 220℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: PCBs
Applications: Analysis of PCBs using Shinwasorb
Column: Silicone OV-17 2％ Shinwasorb-U 60/80　　
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 210℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: ECD
Injection volume: 4.0 μL

View detail

GC
Samples: PCBs
Applications: Analysis of PCBs using Shinwasorb
Column: Silicone OV-1 2％ Shinwasorb-U 60/80　　
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 195℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: ECD
Injection volume: 4.0 μL

View detail

GC
Samples: Ethylene oxide , Propylene oxide
Applications: Measurement of ethylene oxide using Shinwasorb
Column: Flexol 8N8 12.5% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 150℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 150℃
Detector temp.: 150℃
Detector: FID
Injection volume: 100 μL

View detail

GC
Samples: Dichlorvos (DDVP) , Methyldemeton , Methyl parathion , Parathion , EPN
Applications: Measurement of organophosphorus compounds using Shinwasorb
Column: Silicone OV-17 1% Shinwasorb-S 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 180-250℃ (8℃/min)
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FPD
Injection volume: 1.0 μL

View detail

GC
Samples: 2,6-Xylenol , o-Cresol , Phenol , 2,4-Xylenol , p-Cresol , m-Cresol , 3,5-Xylenol , 3,4-Xylenol
Applications: Measurements of cresol and xylenol isomers using Shinwasorb
Column: FAP-S Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 160℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 250℃
Detector temp.: 250℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Methyl mercuric chloride , Ethyl mercuric chloride
Applications: Measurement of alkyl mercury compounds (each 100 ppb in n-hexane) using Shinwasorb
Column: Thermon-HG 5% Shinwasorb-U 60/80
Column Size: 0.5 m x 3.0 mm I.D. Glass
Column temp.: 160℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 250℃
Detector temp.: 250℃
Detector: ECD
Injection volume: 1.0 μL

View detail

GC
Samples: long-chain fatty acid methyl esters (FAMEs)
Applications: Measurement of long-chain fatty acid methyl esters (FAMEs C10～C24) using Shinwasorb
Column: Shinchrom E71 5% Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 230℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 250℃
Detector temp.: 250℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Ethylbenzene , p-Xylene , m-Xylene , o-Xylene
Applications: Measurement of xylene isomers using Shinwasorb
Column: Shinchrom F51+Bentone 34 3+2% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 80℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 240℃
Detector temp.: 240℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Dichloromethane , trans-1,2-Dichloroethylene , Chloroform , 1,2-Dichloroethane , 1,1,1-Trichloroethane , Carbon tetrachloride , Trichloroethylene , Toluene , Tetrachloroethylene , Chlorobenzene , 1,1,2,2,-Tetrachloroethane , o-Dichlorobenzene
Applications: Measurement of chlorinated solvents in air using Shinwasorb
Column: SBS-300 10% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 100℃
Carrier gas: 30 mL/min N₂
Injection port temp.: 240℃
Detector temp.: 240℃
Detector: FID
Injection volume: 1.0 mL

View detail

GC
Samples: palm oil
Applications: Measurement of fatty acid methyl esters (palm oil) using Shinwasorb
Column: Shinchrom E71 5% Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 210℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: beef tallow
Applications: Measurement of Measurement of beef tallow fatty acid methyl esters (FAMEs) using Shinwasorb
Column: Shinchrom E71 5% Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 210℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: liquefied petroleum gas (LPG)
Applications: Measurement of liquefied petroleum gas (LPG) using Shinwasorb
Column: DBM+ODPN (95:5) 35% Shinwasorb-U 60/80
Column Size: 6.0 m (3.0 m+3.0 m) x 3.0 mm I.D. stainless steel
Column temp.: 40℃
Carrier gas: 45 mL/min N₂
Injection port temp.: 50℃
Detector temp.: 50℃
Detector: TCD
Injection volume: 1.0 mL

View detail

GC
Samples: Palmitic acid , Stearic acid , Oleic acid , Linoleic acid , Linolenic acid
Applications: Measurement of fatty acid methyl esters (soy bean oil) using Shinwasorb
Column: Shinchrom E71 5% Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 230℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Chlorodibromomethane , Tetrachloroethylene , Bromoform
Applications: Measurements of trihalomethanes using Shinwasorb -1-
Column: Silicone DC-200 10% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 100℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 240℃
Detector temp.: 240℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Chlorodibromomethane , Tetrachloroethylene , Bromoform
Applications: Measurements of trihalomethanes using Shinwasorb -2-
Column: Silicone DC-550 10% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 90℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 220℃
Detector temp.: 220℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetic acid , Propionic acid , Isobutyric acid , Butyric acid , Isovaleric acid , Valeric acid , Isocaproic acid , Capric acid , Enanthic acid
Applications: Measurement of short-chain free fatty acids using Shinwasorb -1-
Column: Thermon-1000+H3PO4 2.5+0.25% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 150℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 250℃
Detector temp.: 240℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetic acid , Propionic acid , Isobutyric acid , Butyric acid , Isovaleric acid , Valeric acid , Isocaproic acid , Capric acid , Enanthic acid
Applications: Measurement of short-chain free fatty acids using Shinwasorb -2-
Column: FAL-M Shinwasorb-S 60/80 PA
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 150℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene monomer , Cyclopentanol , N,N-Dimethylformamide
Applications: Measurement of styrene monomer in DMF using Shinwasorb
Column: FON 10% Shinwasorb-S 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 110℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 230℃
Detector temp.: 230℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Methyl mercuric chloride
Applications: Measurement of methylmercury in black bass using Shinwasorb
Column: Thermon-HG 5% Shinwasorb-U 60/80
Column Size: 0.5 m x 3.0 mm I.D. Glass
Column temp.: 170℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: ECD
Injection volume: 1.0 μL

View detail

GC
Samples: Methyl mercuric chloride
Applications: Measurement of methylmercury in tuna using Shinwasorb
Column: Thermon-HG 5% Shinwasorb-U 60/80
Column Size: 0.5 m x 3.0 mm I.D. Glass
Column temp.: 170℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: ECD
Injection volume: 1.0 μL

View detail

GC
Samples: Mixture of 13 organic solvents
Applications: Measurement of organic solvents using Shinwasorb -1-
Column: PEG1500 12.5% Shinwasorb-U 40/60
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 70℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Mixture of 22 organic solvents
Applications: Measurement of organic solvents using Shinwasorb -2-
Column: PEG1500 12.5% Shinwasorb-U 40/60
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 60～120℃ (4℃/min)
Carrier gas: 40 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Sorbic acid , Dehydroacetic acid , Benzoic acid , trans-Stilbene
Applications: Analysis of preservatives using Shinwasorb -1-
Column: DEGS+H3PO4 5.0+0.5% Shinwasorb-S 40/60
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 185℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: preservatives
Applications: Analysis of preservatives using Shinwasorb -2-
Column: Advance-DS+H3PO4 2+0.25% Shinwasorb-S 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 260℃
Detector temp.: 260℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Methyl iodide , iso-Propyl iodide , n-Octane , o-Xylene
Applications: Analysis of hypromellose using Shinwasorb
Column: Silicone DC-200 10% Shinwasorb-S 100/120
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 90℃
Carrier gas: 38 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Carbon sulfide , Hydrogen sulfide , Carbon disulfide , Methyl mercaptan , Ethyl mercaptane , Dimethyl sulfide
Applications: Measurements of offensive odor substances using Shinwasorb -3-
Column: 1,2,3-TCEP 25% Shinwasorb-S 80/100 ST
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 70℃
Carrier gas: 50 mL/min N₂
Injection port temp.: 180℃
Detector temp.: 180℃
Detector: FPD
Injection volume: 1.0 μL

View detail

GC
Samples: Fragrance
Applications: Measurements of fragrance using Shinwasorb
Column: Thermon-3000 5% Shinwasorb-S 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 80～260℃（6℃/min)
Carrier gas: 50 mL/min N₂
Injection port temp.: 280℃
Detector temp.: 280℃
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Chloroform , Ethanol , Naphthalene , Amantadine
Applications: Measurements of amantadine hydrochloride using Shinwasorb
Column: Apiezone L+KOH 2+1% Shinwasorb-S 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 125℃(5 min hold)～150℃(5℃/min)～150℃ (10 min hold)
Carrier gas: 50 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: 200 ppm in hexane
Applications: Measurements of eucalyptus oil using Shinwasorb
Column: Thermon-3000 5% Shinwasorb-S 80/100
Column Size: 5.1 m x 3.2 mm I.D. Glass
Column temp.: 120℃ & 130℃
Carrier gas: 40 mL/min N₂
Injection port temp.: 200℃
Detector temp.: 200℃
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: homatropine hydrobromide , atropine
Applications: Analysis of opium alkaloid atropine using Shinwasorb
Column: Silicone OV-17 1% Shinwasorb-S 60/80
Column Size: 1.6m×3.2mm glass
Column temp.: 210°C
Carrier gas: 40 mL/min N2
Injection port temp.: 270°C
Detector temp.: 270°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: homatropine hydrobromide , scopolamine
Applications: Analysis of opium alkaloid scopolamine using Shinwasorb
Column: Silicone OV-17 1% Shinwasorb-S 60/80
Column Size: 1.6m×3.2mm glass
Column temp.: 210°C
Carrier gas: 45 mL/min N2
Injection port temp.: 250°C
Detector temp.: 250°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene monomer , Cyclopentanol , N, N-Dimethylformamide ,
Applications: Measurement of styrene monomer in DMF using Shinwasorb
Column: FFAP 10% Shinwasorb-U 60/80
Column Size: 3.1m×3.2mm glass
Column temp.: 120°C
Carrier gas: 50 mL/min N2
Injection port temp.: 240°C
Detector temp.: 240°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: decane , undecane , dodecane , tridecane , tetradecane , pentadecane , hexadecane , heptadecane , octadecane , nonadecane , eicosane , heneicosane , docosane
Applications: Analysis of mixture of kerosene and gas oil using Shinwasorb
Column: Silicone SE-52 5% Shinwasorb-U 40/60
Column Size: 2.5 m x 3.0 mm I.D. Stainless steel
Column temp.: 80～250℃ (6℃/min), 250℃ (12 min hold)
Carrier gas: 50 mL/min N2
Injection port temp.: 270°C
Detector temp.: 270°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Ethyl acetate , di-n-butyl phthalate , Teprenone (mono-cis isomer) , Teprenone (all-trans isomer) , ,
Applications: Analysis of teprenone using Shinwasorb -1-
Column: FFAP 5% Shinwasorb-U 80/100
Column Size: 2.1m×3.2mm glass
Column temp.: 235°C
Carrier gas: 47 mL/min N2
Injection port temp.: 270°C
Detector temp.: 270°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: n-valeric acid , valproic acid
Applications: Analysis of valproate sodium using Shinwasorb
Column: DEGA+H3PO4 2.5+0.5% Shinwasorb-S 80/100
Column Size: 2.1m×3.2mm glass
Column temp.: 145°C
Carrier gas: 35 mL/min N2
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Ethanol , Dl-camphor , Methyl salicylate ,
Applications: Analysis of dl-camphor using Shinwasorb
Column: PEG 20M 5% Shinwasorb-S 60/80
Column Size: 3.1m×3.2mm glass
Column temp.: 160°C
Carrier gas: 45 mL/min N2
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Ethyl acetate , di-n-butyl phthalate , Teprenone (mono-cis isomer) , Teprenone (all-trans isomer) , ,
Applications: Analysis of teprenone using Shinwasorb -2-
Column: FFAP 5% Shinwasorb-U 80/100
Column Size: 2.1m×3.2mm glass
Column temp.: 235°C
Carrier gas: 47 mL/min N2
Injection port temp.: 270°C
Detector temp.: 270°C
Detector: FID
Injection volume: 2.0 µL

View detail

GC
Samples: acetone , styrene , , ,
Applications: Analysis of polystyrene sulfonate calcium using Shinwasorb
Column: PEG20M 7.5% Shinwasorb-S 80/100
Column Size: 2.1m×3.2mm glass
Column temp.: 90°C
Carrier gas: 60 mL/min N2
Injection port temp.: 260°C
Detector temp.: 260°C
Detector: FID
Injection volume: 5.0 µL

View detail

GC
Samples: ethanol , n-ethyl caprylate , L-menthol , , ,
Applications: Analysis of polystyrene peppermint oil　using Shinwasorb
Column: PEG6000 12.5% Shinwasorb-S 60/80
Column Size: 2.1m×3.2mm glass
Column temp.: 140°C
Carrier gas: 33 mL/min N2
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 1.0 µL

View detail

GC
Samples: docosanoic acid methyl , ethyl icosapentate ,
Applications: Analysis of ethyl icosapentate using Shinwasorb
Column: DEGS 12.5% Shinwasorb-S 60/80
Column Size: 1.8 m x 4.0 mm I.D. Glass
Column temp.: 210℃
Carrier gas: 47 mL/min N2
Injection port temp.: 230℃
Detector temp.: 200℃ 　
Detector: FID
Injection volume: 3.0 μL

View detail

GC
Samples: N,N-dimethylformamide , Triphenylantimony , Spectinomycin ,
Applications: Analysis of spectinomycin hydrochloride hydrate using Shinwasorb
Column: Silicone SE-52 2.5% Shinwasorb-S 80/100
Column Size: 0.6 m x 3.2 mm I.D. Glass
Column temp.: 180℃
Carrier gas: 37 mL/min N2
Injection port temp.: 215℃
Detector temp.: 220℃ 　
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Petroleum ether , Methyl oleate
Applications: Analysis of oleic acid using Shinwasorb
Column: Shinchrom E71 10% Shinwasorb-U 80/100
Column Size: 2.1m×3.2mm
Column temp.: 210°C
Carrier gas: N2,21 ml/min
Injection port temp.: 250°C
Detector temp.: 250°C
Detector: FID
Injection volume: 0.2 μL

View detail

GC
Samples: Ethyl acetate , Caffeine , o-Toluene sulfonamide
Applications: Analysis of saccharin using Shinwasorb
Column: DEGS 1.5% Shinwasorb-S 60/80
Column Size: 1.0 m x 3.0 mm I.D. Glass
Column temp.: 210°C
Carrier gas: N2,55ml/min
Injection port temp.: 225°C
Detector temp.: 250°C
Detector: FID

View detail

GC
Samples: Limonene , Cineole
Applications: Analysis of eucalyptus oil using Shinwasorb
Column: Thermon-3000 5% Shinwasorb-S 80/100
Column Size: 5.1 m x 3.2 mm I.D. Glass
Column temp.: 130°C
Carrier gas: N2,35ml/min
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID

View detail

GC
Samples: Dichloromethane , l-menthol ,
Applications: Analysis of l-menthol using Shinwasorb
Column: PEG6000 12.5％ Shinwasorb-S 60/80
Column Size: 2.1m x3.2 mm I.D. Glass
Column temp.: 140°C
Carrier gas: N2,33ml/min
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 5.0 μL

View detail

GC
Samples: Pyridine , N,N-dimethylformamide
Applications: Analysis of niceritrol using Shinwasorb
Column: PEG20M 5% Shinwasorb-S 80/100
Column Size: 3.1m x3.2 mm I.D. Glass
Column temp.: 160°C
Carrier gas: N2, 55ml/min
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Ethylene glycol , Diethylene glycol
Applications: Analysis of macrogol 400 using Shinwasorb
Column: Sorbitol 3% Shinwasorb-S 80/100
Column Size: 1.6 m x 3.2 mm I.D. Glass
Column temp.: 160℃
Carrier gas: 47 mL/min N2
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Cyclohexane , N,N-dimethylaniline , Naphthalene ,
Applications: Analysis of ampicillin hydrate using Shinwasorb
Column: Silicone OV-17 1.5% Shinwasorb-S 60/80
Column Size: 2.1 m x 2.6 mm I.D. Glass
Column temp.: 105℃
Carrier gas: 20 mL/min He（adjust so that the retention time of N,N-dimethylaniline is about 5 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Cyclohexane , Ethyl acetate , 2-propanol ,
Applications: Analysis of lenampicillin hydrochloride using Shinwasorb
Column: Quadrol 5% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 100℃
Carrier gas: 70 mL/min N₂ (Adjust so that the retention time of cyclohexane is about 1 minute.)
Injection port temp.: 160°C
Detector temp.: 160°C
Detector: FID
Injection volume: 4.0 μL

View detail

GC
Samples: Enflurane , 2-propanol ,
Applications: Analysis of enflurane using Shinwasorb
Column: DEGS 10% Shinwasorb-S 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 80℃
Carrier gas: 32 mL/min He (Adjust so that the retention time of enflurane is about 3 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 5.0 μL

View detail

GC
Samples: Isoflurane , Ethyl acetate
Applications: Analysis of isoflurane using Shinwasorb
Column: Igepal CO-880+Ucon LB-550X 5+7.5% Shinwasorb-S 100/120
Column Size: 3.5 m x 3.0 mm I.D. Stainless steel
Column temp.: 80℃
Carrier gas: 37 mL/min N2 (Adjust so that the retention time of isoflurane is about 7 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Pyridine , 2-ethyl-2-phenylmalonediamide , Stearylalcohol ,
Applications: Analysis of primidone using Shinwasorb ～Purity test (3) 2-ethyl-2-phenylmalonediamide～
Column: Silicone OV-17 1.5% Shinwasorb-S 100/120
Column Size: 1.6 m x 3.2 mm I.D. Glass
Column temp.: 195℃
Carrier gas: 31 mL/min N2 (Adjust so that the retention time of stearylalcohol is about 10 minutes.)
Injection port temp.: 250°C
Detector temp.: 250°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Cyclohexane , Dicyclohexyl phthalate , Etofenprox
Applications: Analysis of etofenprox using Shinwasorb
Column: Silicone OV-225 2.5% Shinwasorb-U 60/80
Column Size: 1.1m x 3.2 mm I.D. Glass
Column temp.: 240℃
Carrier gas: 37 mL/min N₂ (Adjust so that the retention time of dicyclohexyl phthalate is about 8 minutes.)
Injection port temp.: 250°C
Detector temp.: 250°C
Detector: FID
Injection volume: 3.0 μL

View detail

GC
Samples: Etofenprox in Cyclohexane
Applications: Analysis of etofenprox using Shinwasorb -2- ～Purity (3) Related substances～
Column: Silicone OV-225 2.5% Shinwasorb-U 60/80
Column Size: 1.1m x 3.2 mm I.D. Glass
Column temp.: 240℃
Carrier gas: 37 mL/min N₂
Injection port temp.: 250°C
Detector temp.: 250°C
Detector: FID
Injection volume: 3.0 μL

View detail

GC
Samples: o-Dichlorobenzene, m-Bromochlorobenzene in acetone
Applications: Analysis of o-dichlorobenzene using Shinwasorb
Column: PEG20M-TPA 2.5% Shinwasorb-U 60/80
Column Size: 3.1 m x 3.2 mm I.D. Glass
Column temp.: 115℃
Carrier gas: 39 mL/min N₂ (Adjust so that the retention time of o-dichlorobenzene is about 11 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Acetone , cis-Allethrin , trans-Allethrin
Applications: Analysis of allethrin using Shinwasorb Part 2 ～Isomer ratio～
Column: Silicone DC QF-1 2.5% Shinwasorb-U 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 165℃
Carrier gas: 45 mL/min N₂ (Adjust so that the retention time of trans-allethrin is about 40 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetone , Allethrin , Di(2-ethylhexyl) phthalate
Applications: Analysis of allethrin using Shinwasorb Part 3
Column: Diethyleneglycol Succinate (DEGS) 2.5% Shinwasorb-U 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 36 mL/min N₂ (Adjust so that the retention time of allethrin is about 8 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetone , Dichlorvos , 1-chloronaphthalene
Applications: Analysis of dichlorvos using Shinwasorb
Column: Silicone DC-550 10% Shinwasorb-S 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 180℃
Carrier gas: 40 mL/min N₂ (Adjust so that the retention time of dichlorvos is about 6 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Chloroform , Fenitrothion , Fluoranthene
Applications: Analysis of fenitrothion using Shinwasorb
Column: Polyphenyl Ether (5 rings) 1.5% Shinwasorb-S 100/120
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 195℃
Carrier gas: 55 mL/min N₂ (Adjust so that the retention time of fenitrothion is about 16 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Dichlorvos , Tributyl phosphate
Applications: Analysis of dichlorvos using Shinwasorb -2-
Column: Silicone OV-225 1% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 170℃
Carrier gas: 50 mL/min N₂（Adjust so that the retention time of tributyl phosphate is about 5 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FPD
Injection volume: 2.0 μL

View detail

GC
Samples: Acetone , Allethrin , Cinerin I , Jasmolin I , Pyrethrin I , Cinerin II , Jasmolin II , Pyrethrin II
Applications: Analysis of pyrethrum extract using Shinwasorb
Column: Silicone OV-17 1% Shinwasorb-S 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 205℃
Carrier gas: 35 mL/min N₂（Adjust so that the retention time of Allethrin is about 3 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FPD
Injection volume: 1.0 μL

View detail

GC
Samples: Dichlorvos, Diphenyl in Acetone
Applications: Analysis of dichlorvos resin strip using Shinwasorb
Column: Silicone OV-11 10% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 170℃
Carrier gas: 35 mL/min N₂（Adjust so that the retention time of dichlorvos is about 8 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 3.0 μL

View detail

GC
Samples: Diazinon, Di-n-butyl phthalate in Acetone
Applications: Analysis of diazinon using Shinwasorb
Column: Silicone OV-11 10% Shinwasorb-U 60/80
Column Size: 1.6 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 25 mL/min N₂（Adjust so that the retention time of diazinon is about 7 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 3.0 μL

View detail

GC
Samples: Anhydrous caffeine, Fenitrothion in Acetone
Applications: Analysis of Fenitrothion Emulsifiable Concentrate using Shinwasorb
Column: Silicone OV-210 3% Shinwasorb-S 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 175℃
Carrier gas: 51 mL/min N₂（Adjust so that the retention time of Anhydrous caffeine is about 10 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Anhydrous caffeine, Fenitrothion in Acetone
Applications: Analysis of Fenitrothion Microcapsule using Shinwasorb
Column: Silicone OV-210 1.5% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 165℃
Carrier gas: 50 mL/min N₂（Adjust so that the retention time of diazinon is about 17 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Benzyl salicylate, Fenitrothion in Acetone
Applications: Analysis of fenitrothion, phthalthrin mixed emulsifiable concentrate using Shinwasorb -1-
Column: Silicone OV-210 1.5% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 175℃
Carrier gas: 52 mL/min N₂ (Adjust so that the retention time of fenitrothion is about 15 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Phthalthrin in Acetone
Applications: Analysis of phthalthrin using Shinwasorb ～Isomer ratio phthalthrin～
Column: Silicone DC QF-1 2.5% Shinwasorb-S 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 40 mL/min N₂（ Adjusted so that the retention time of 3.Phthalthrin is about 40 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 1.0 μL

View detail

LC/GC Search / Application Note

Shinwa Chemical Industries
Application Search

Keyword index

Search result
"Shinwasorb" Filtered 70 Item.

Shinwa Chemical Industries Application Search

Keyword index

Search result "Shinwasorb" Filtered 70 Item.

Shinwa Chemical Industries
Application Search

Search result
"Shinwasorb" Filtered 70 Item.