Application Search

Search result
"Diethyl Phthalate" Filtered 6 Item.

GC
Samples: Diethyl Phthalate , Di-iso-Butyl Phthalate , Di-n-Butyl Phthalate , Di-n-Amyl Phthalate , Diheptyl Phthalate , Dioctyl Phthalate
Applications: Phthalic acid ester (2) (200ppm)
Column: Thermon-3000 2% Chromosorb W 80-100 (AW-DMCS)
Column Size: 2.1m×3.2mm
Column temp.: 215°C
Carrier gas: N2,65ml/min
Injection port temp.: 260°C
Detector temp.: 260°C(FID)

GC
Samples: Dimethyl Phthalate , Diethyl Phthalate , Diallyl Phthalate , Di-iso-Butyl Phthalate , Di-n-Butyl Phthalate , Di-n-Amyl Phthalate , Di-2-Ethylhexyl Phthalate , Di-n-Octyl Phthalate
Applications: Phthalic acid ester (1)
Column: ULBON HR-1
Column Size: 25m×0.25mm(0.25μm)
Column temp.: 180°C→300°C(6°C/min)
Carrier gas: He,0.98ml/min
Detector temp.: 320°C(FID)
Injection volume: 0.5μl

GC
Samples: β-Pinene , Limonene , Linalool , Linalyl Acetate , Benzyl Acetate , α-Ionene , Phenethyl Alcohol , Lauryl Alcohol , Eugenol , Diethyl Phthalate , Vanillin , Benzyl Salicylate
Applications: perfume (2)
Column: ULBON HR-Thermon-600T
Column Size: 50m×0.25mm
Column temp.: 70°C→230°C(4°C/min)
Carrier gas: He,1.1ml/min
Detector temp.: 250°C(FID)

GC
Samples: Deet, diethyl phthalate in ethanol
Applications: Analysis of deet (Pesticide guidelines) ~Purity test (4) Related substances~
Column: ULBON HR-20M
Column Size: 0.2 mm I.D. x 25 m df = 0.1 µmm
Column temp.: 170℃
Carrier gas: 21 cm/sec He (Adjust so that the retention time of deet is about 10 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 2.0 μL (Split rate: 1:70)

GC
Samples: Acetone , Allethrin , Di(2-ethylhexyl) phthalate
Applications: Analysis of allethrin using Shinwasorb Part 3
Column: Diethyleneglycol Succinate (DEGS) 2.5% Shinwasorb-U 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 36 mL/min N₂ (Adjust so that the retention time of allethrin is about 8 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 1.0 μL