Search result
"H3PO4" Filtered 33 Item.
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid . Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- [ DEGS + H3PO4 ] Apprication of Lower free fatty acid
- Column
- DEGS+H3PO4(10%+1%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Sorbic Acid , Dehydroacetic Acid , Benzoic Acid , trans-Stilbene
- Applications
- Antiseptics (2)
- Column
- DEGS+H3PO4(2%+0.5%) Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Sorbic Acid , Dehydroacetic Acid , Benzoic Acid , trans-Stilbene(I.S.)
- Applications
- Antiseptics (1)
- Column
- DEGS+H3PO4(5%+1%) Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 185°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Valeric Acid , Isocaproic Acid , Caproic Acid
- Applications
- Free lower fatty acids (4) (each 100ppm)
- Column
- FFAP+H3PO4(0.3%+0.3%) Graphitecarbon 60〜80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 80°C→220°C(16°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- [ Thermon-1000+H3PO4 ] Apprication of Lower free fatty acid
- Column
- Thermon-1000+H3PO4(10%+1%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Acetic acid , Propionic acid , Isobutyric acid , Butyric acid , Isovaleric acid , Valeric acid , Isocaproic acid , Capric acid , Enanthic acid
- Applications
- Measurement of short-chain free fatty acids using Shinwasorb -1-
- Column
- Thermon-1000+H3PO4 2.5+0.25% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 150℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250℃
- Detector temp.
- 240℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Sorbic acid , Dehydroacetic acid , Benzoic acid , trans-Stilbene
- Applications
- Analysis of preservatives using Shinwasorb -1-
- Column
- DEGS+H3PO4 5.0+0.5% Shinwasorb-S 40/60
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 185℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- preservatives
- Applications
- Analysis of preservatives using Shinwasorb -2-
- Column
- Advance-DS+H3PO4 2+0.25% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 200℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- n-valeric acid , valproic acid
- Applications
- Analysis of valproate sodium using Shinwasorb
- Column
- DEGA+H3PO4 2.5+0.5% Shinwasorb-S 80/100
- Column Size
- 2.1m×3.2mm glass
- Column temp.
- 145°C
- Carrier gas
- 35 mL/min N2
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
LC
- Samples
- Atenolol
- Applications
- Atenolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 90/10
- Frow rate
- 0.3 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Methylephedrine hydrochloride , Noscapine , Thiamine , Dextromethorphan , Carbinoxamine maleate
- Applications
- The component of the cold remedy (1)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O/H3PO4 = 510/490/1 + 0.5% Sodium dodecyl sulfate
- Frow rate
- 1.0 mL/min
- Column temp.
- 50°C
View detail
LC
- Samples
- Nicotinic acid , Nicotinic acid amide , Calcium pantothenate , Pyridoxine hydrochloride , Riboflavin phosphate , Thiamine , Folic acid , Biotin , Riboflavin
- Applications
- The water-soluble vitamin
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM H3PO4/5 mM Sodium 1-hexanesulfonate = 91/9
- Frow rate
- 1.0 mL/min
- Column temp.
- 45°C
View detail
LC
- Samples
- 2-(4-Hydroxyphenoxy)propionic acid
- Applications
- 2-(4-Hydroxyphenoxy)propionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bepridil hydrochloride
- Applications
- Bepridil hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bicalutamide
- Applications
- Bicalutamide
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bicalutamide
- Applications
- Bicalutamide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 87/13
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Duloxetine hydrochloride
- Applications
- Duloxetine hydrochloride
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 65/35
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Sertraline hydrochloride
- Applications
- Analysis of Sertraline hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Nisoldipine
- Applications
- Analysis of Nisoldipine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 88/12
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Cinacalcet hydrochloride
- Applications
- Analysis of Cinacalcet hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 93/7
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Atorvastatin calcium
- Applications
- Analysis of Atorvastatine calcium
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM K2HPO4 + H3PO4 (pH 7.5)/CH3OH = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Montelukast sodium
- Applications
- Analysis of Montelukast sodium
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3OH = 60/40
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Rebamipide
- Applications
- Analysis of Rebamipide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 87/13
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Sulconazole nitrate
- Applications
- Analysis of Sulconazole nitrate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3OH = 86/14
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- 2-(4-Hydroxyphenoxy)propionic acid
- Applications
- Analysis of 2-(4-Hydroxyphenoxy)propionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- 3,3-Dimethyl-4-phenyl-2-azetidinone
- Applications
- Analysis of 3,3-Dimethyl-4-phenyl-2-azetidinone
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- 2-Phenoxypropionic acid
- Applications
- Analysis of 2-Phenoxypropionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/C2H5OH = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of Tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of Tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Linolenic acid , Myristic acid , Palmitoleic acid , Arachidonic acid , Linoleic acid , Palmitic acid , Oleic acid
- Applications
- Analysis of Long-chain fatty acid
- Column
- STR ODS-Ⅱ
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/0.1% H3PO4 aq = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
- Injection volume
- 5 µL
- Diluent
- ethyl acetate
View detail