Application Search

GC
Samples: Erythritol , Adonitol , Xylitol , Mannitol , Sorbitol , Inositol
Applications: Alditol
Column: Advance-DS 5% Chromosorb W 80-100 (AW-DMCS)
Column Size: 2.1m×3.2mm
Column temp.: 225°C
Carrier gas: N2,60ml/min
Injection port temp.: 260°C
Detector temp.: 260°C(FID)

View detail

GC
Samples: Naphthalene , Biphenyl , Fluorene , Phenanthrene , Anthracene , o-Terphenyl , Fluoranthene , Pyrene , m-Terphenyl , p-Terphenyl , Chrysene , 4,5-Benzpyrene , 1,2-Benzpyrene , Perylene
Applications: Polycyclic aromatic hydrocarbon
Column: ULBON HR-1
Column Size: 50m×0.25mm(0.25μm)
Column temp.: 200°C→320°C(4°C/min)
Carrier gas: He,068ml/min
Detector temp.: 330°C(FID)
Injection volume: 1μl

View detail

GC
Samples: Ethanol , Toluene , Chlorobenzene
Applications: Analysis of allethrin using Sunpak-H Part 1 ～Purity (4) Toluene～
Column: Sunpak-H 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 170℃
Carrier gas: 37 mL/min N₂ (Adjust so that the retention time of toluene is about 5 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetone , cis-Allethrin , trans-Allethrin
Applications: Analysis of allethrin using Shinwasorb Part 2 ～Isomer ratio～
Column: Silicone DC QF-1 2.5% Shinwasorb-U 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 165℃
Carrier gas: 45 mL/min N₂ (Adjust so that the retention time of trans-allethrin is about 40 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetone , Allethrin , Di(2-ethylhexyl) phthalate
Applications: Analysis of allethrin using Shinwasorb Part 3
Column: Diethyleneglycol Succinate (DEGS) 2.5% Shinwasorb-U 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 36 mL/min N₂ (Adjust so that the retention time of allethrin is about 8 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 1.0 μL

View detail

GC
Samples: Acetone , Allethrin , Cinerin I , Jasmolin I , Pyrethrin I , Cinerin II , Jasmolin II , Pyrethrin II
Applications: Analysis of pyrethrum extract using Shinwasorb
Column: Silicone OV-17 1% Shinwasorb-S 80/100
Column Size: 1.1 m x 3.2 mm I.D. Glass
Column temp.: 205℃
Carrier gas: 35 mL/min N₂（Adjust so that the retention time of Allethrin is about 3 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FPD
Injection volume: 1.0 μL

View detail

GC
Samples: Benzyl salicylate, Fenitrothion in Acetone
Applications: Analysis of fenitrothion, phthalthrin mixed emulsifiable concentrate using Shinwasorb -1-
Column: Silicone OV-210 1.5% Shinwasorb-U 60/80
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 175℃
Carrier gas: 52 mL/min N₂ (Adjust so that the retention time of fenitrothion is about 15 minutes.)
Injection port temp.: 200°C
Detector temp.: 200°C
Detector: FID
Injection volume: 2.0 μL

View detail

GC
Samples: Phthalthrin in Acetone
Applications: Analysis of phthalthrin using Shinwasorb ～Isomer ratio phthalthrin～
Column: Silicone DC QF-1 2.5% Shinwasorb-S 80/100
Column Size: 2.1 m x 3.2 mm I.D. Glass
Column temp.: 200℃
Carrier gas: 40 mL/min N₂（ Adjusted so that the retention time of 3.Phthalthrin is about 40 minutes.)
Injection port temp.: 230°C
Detector temp.: 230°C
Detector: FID
Injection volume: 1.0 μL

View detail

LC
Samples: Aspartic acid , Glutamic acid , Serine , Glycine , Histidine , Arginine , Threonine , Alanine , Proline , Tyrosine , Valine , Methionine , Cysteine-cysteine , Isoleucine , Leucine , Phenylalanine , Lysine
Applications: Analysis of the PTC amino acid
Column: STR ODS-II
Column Size: 150 mm L × 4.6 mm I.D.
Mobile phase: A: CH3COONa (pH 6.5)/CH3CN = 93/7, B: CH3CN/H2O = 4/1
Frow rate: 1.0 mL/min
Column temp.: 40°C

View detail

LC
Samples: 1,5-Dihydroxyanthraquinone
Applications: The elution behavior of the sample which forms metal complex
Column: STR ODS-II
Column Size: 150 mm L × 4.6 mm I.D.
Mobile phase: 20 mM Phosphoric acid buffer (pH 7.6)/CH3OH = 30/70
Frow rate: 1.0 mL/min
Column temp.: 40°C

View detail

LC
Samples: (CYS)2 , LYS , ARG , HIS , ASP , GLU , GLN , ASN , GLY , SER , ALA , THR , PRO , TYR , VAL , PHE , MET , TRP , LEU+ILE
Applications: Analysis of underivatized amino acids by LC/MS/MS
Column: ULTRON AF-HILIC-CD (PLSS)
Column Size: 150 mm L × 2.0 mm I.D.
Mobile phase: A: 100 mM HCO2NH4(pH 3.0)/CH3CN = 10/90, B: 100 mM HCO2NH4(pH 3.0)/CH3CN = 70/30
Frow rate: 0.36 mL/min
Column temp.: 40°C
Injection volume: 1.0 µL (5.0 µg/mL)

View detail

LC
Samples: Erythritol , Xylitol , Fructose , Glucose , Sorbitol , Sucrose , Inositol , Maltose , Maltitol , Lactose , Lactitol
Applications: Analysis of saccharides and sweeteners
Column: ULTRON AF-HILIC-CD
Column Size: 150 mm L × 2.0 mm I.D.
Mobile phase: A: 100mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90, B: 100mM CH3CO2NH4 (pH6.8) /CH3CN = 70/30
Frow rate: 0.32 mL/min
Column temp.: 40°C
Injection volume: 1.0 µL
Diluent: H2O /CH3CN = 50/50

View detail

LC
Samples: Erythritol , Psicose , Tagatose , Allose , Glucose , Sucrose
Applications: Analysis of rare sugar, Glucose, and Sucrose
Column: ULTRON AF-HILIC-CD
Column Size: 150 mm L × 2.0 mm I.D.
Mobile phase: 100mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90
Frow rate: 0.36 mL/min
Column temp.: 40°C
Injection volume: 1.0 µL
Diluent: H2O /CH3CN = 50/50

View detail

LC
Samples: Cetirizine hydrochloride
Applications: Analyses of Cetirizine hydrochloride in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 90/10
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL　(2)0.5 µL
Diluent: mobile phase

View detail

LC
Samples: Carvedilol
Applications: Analyses of Carvedilol in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 7.0)/CH3CN = 75/25
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL　(2)0.5 µL
Diluent: ethanol

View detail

LC
Samples: Amlodipine
Applications: Analyses of Amlodipine in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Atomoxetine hydrochloride
Applications: Analyses of Atomoxetine hydrochloride in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 80/20
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Candesartan cilexetil
Applications: Analyses of Candesartan cilexetil in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4/CH3CN = 75/25
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Tolterodine
Applications: Analyses of Tolterodine in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 (pH 4.6)/CH3CN = 92/8
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Prilocaine hydrochloride
Applications: Analyses of Prilocaine hydrochloride in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Duloxetine hydrochloride
Applications: Analyses of Duloxetine hydrochloride in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: mobile phase

View detail

LC
Samples: Rabeprazole sodium salt
Applications: Analyses of Rabeprazole sodium salt in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3OH = 80/20
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: ethanol

View detail

LC
Samples: Ibuprofen
Applications: Analyses of Ibuprofen in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 (pH 4.6)/CH3OH = 80/20
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: ethanol

View detail

LC
Samples: Formoterol fumarate
Applications: Analyses of Formoterol fumarate in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM K2HPO4 + 20 mM KH2PO4 (pH 7.0)/C2H5OH = 94/6
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: methanol

View detail

LC
Samples: Tolperisone hydrochloride
Applications: Analyses of Tolperisone hydrochloride in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + 20 mM K2HPO4 (pH 5.5)/C2H5OH = 95/5
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL (2)0.5 µL
Diluent: ethanol

View detail

LC
Samples: Tadalafil
Applications: Analyses of Tadalafil in ULTRON ES-OVM series.(Faster analyses with 3µm particles)
Column: ULTRON ES-OVM
Column Size: (1)150 mm L × 4.6 mm I.D.　(2)100 mm L × 3.0 mm I.D.
Mobile phase: 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
Frow rate: 1.0 mL/min
Column temp.: 25°C
Injection volume: (1)2.0 µL　(2)0.5 µL
Diluent: methanol