Search result
"2" Filtered 576 Item.
GC
- Samples
- Carbonyl Sulfide , Hydrogen Sulfide , Carbon Disulfide , Methyl Mercaptan , Ethyl Mercaptan , Dimethyl Sulfide , Benzene(Solvent) , Dimethyl Disulfide
- Applications
- Sulfur Compounds of Air Pollution
- Column
- 1,2,3-TCEP 25% Shimalite 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 70°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 180°C
- Detector temp.
- 180°C
- Detector
- FPD
View detail
GC
- Samples
- Air , Carbon Monoxide , Methane , Carbon Dioxide
- Applications
- Gas (Air, CO, CH4, CO2)
- Column
- Activated Charcoal 60-80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 50°C
- Carrier gas
- He,50ml/min
- Injection port temp.
- 50°C
- Detector temp.
- 50°C(TCD)
View detail
GC
- Samples
- Methyl Caprate , Methyl Laurate , Methyl Myristate , Methyl Palmitate , Methyl Stearate , Methyl Oleate , Methyl Linoleate , Methyl Arachidate , Methyl Linolenate , Methyl Behenate
- Applications
- Standard Mixture of Fatty Acid Methyl Esters
- Column
- Advance-DS 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Erythritol , Adonitol , Xylitol , Mannitol , Sorbitol , Inositol
- Applications
- Alditol
- Column
- Advance-DS 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 225°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Caprylic Acid , Capric Acid , Lauric Acid , Myristic Acid , Palmitic Acid , Stearic Acid , Oleoic Acid
- Applications
- Free fatty acid in the cocoanut oil
- Column
- Advance-DS 5% Shinchrom A 80〜100(DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 225°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Myristic Acid , Palmitic Acid , Palmitoleic Acid , Stearic Acid , Oleoic Acid , Linoleic Acid , cis-5-Eicosenoic Acid , Erucic Acid
- Applications
- Free fatty acid of fish oil (salmon)
- Column
- Advance-DS 5% Shinchrom A 80-100 (DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 225°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Sorbic Acid , Dehydroacetic Acid , Benzoic Acid , trans-Stilbene(I.S.)
- Applications
- Antiseptics in the food
- Column
- Advance-DS 5% Shinchrom A 80-100 (DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 210°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- p-Chlorostyrene , m-Chlorostyrene
- Applications
- Chlorostyrene isomer
- Column
- Bentone 34+DNP(5%+5%) Shimalite 80-100 (AW)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 110°C
- Carrier gas
- He,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(TCD)
View detail
GC
- Samples
- Ethylbenzene , p-Xylene , m-Xylene , o-Xylene
- Applications
- Xylene isomer (each 1000ppm)
- Column
- Bentone 34+DNP 5%+5% Shimalite 80/100 NAW
- Column Size
- 3.1m×3.2mm
- Column temp.
- 80°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid . Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- [ DEGS + H3PO4 ] Apprication of Lower free fatty acid
- Column
- DEGS+H3PO4(10%+1%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Sorbic Acid , Dehydroacetic Acid , Benzoic Acid , trans-Stilbene
- Applications
- Antiseptics (2)
- Column
- DEGS+H3PO4(2%+0.5%) Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Sorbic Acid , Dehydroacetic Acid , Benzoic Acid , trans-Stilbene(I.S.)
- Applications
- Antiseptics (1)
- Column
- DEGS+H3PO4(5%+1%) Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 185°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Trimethylamine , Dimethylamine , Monomethylamine
- Applications
- Mono-, di-, trimethylamine
- Column
- Diglycerol+TEP+KOH(15%+15%+2%) Chromosorb W 80-100 (AW-DMIS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 70°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- Free lower fatty acids in water (2) (each 50ppm)
- Column
- FAL-M 10% Shimalite TPA 60-80
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Methyl Alcohol , Ethyl Alcohol , Isopropyl Alcohol , tert-Butyl Alcohol , n-Propyl Alcohol , sec-Butyl Alcohol , Isobutyl Alcohol , n-Butyl Alcohol , Isoamyl Alcohol , n-Amyl Alcohol
- Applications
- Lower alcohol (2) (each 500ppm)
- Column
- FAL-M 10% Shimalite TPA 60-80
- Column Size
- 2.1m×3.2mm
- Column temp.
- 90°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Acetaldehyde , Acrolein , Crotonaldehyde , Paraldehyde , Furfural , Benzaldehyde
- Applications
- Unsaturated aldehyde (200ppm)
- Column
- FAL-M 10% Shimalite TPA 60-80
- Column Size
- 2.1m×3.2mm
- Column temp.
- 120°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Acetaldehyde , Propionaldehyde , Isobutylaldehyde , n-Butylaldehyde , Isovaleraldehyde, n-Valeraldehyde
- Applications
- Saturated aldehyde
- Column
- FAL-M 10% Shimalite TPA 60-80
- Column Size
- 2.1m×3.2mm
- Column temp.
- 75°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- 2,6-Xylenol , o-Cresol , Phenol , 2,4-Xylenol , p-Cresol , m-Cresol , 3,5-Xylenol , 3,4-Xylenol
- Applications
- Cresol isomer and Xylenol
- Column
- FAP-S Chromosorb W 60-80 (AW)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene Monomer , Cyclopentanol
- Applications
- Residual styrene monomer in the packaging material
- Column
- FFAP 20% Chromosorb W 80-100 AW
- Column Size
- 3.1m×3.2mm
- Column temp.
- 130°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Valeric Acid , Isocaproic Acid , Caproic Acid
- Applications
- Free lower fatty acids (4) (each 100ppm)
- Column
- FFAP+H3PO4(0.3%+0.3%) Graphitecarbon 60〜80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 80°C→220°C(16°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Ethyleneoxide , Propyleneoxide , Ethanol
- Applications
- Oxirane and propylene oxide in Ethanol (2)
- Column
- Flexol 8N8 25% Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 50°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 200°C
- Detector temp.
- 200°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Valeric Acid , Isocaproic Acid , Caproic Acid
- Applications
- Free lower fatty acids in Acetone(each 200ppm)
- Column
- FON 20% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 170°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene Monomer , Cyclopenthanol , N,N-Dimethylformamide
- Applications
- Styrene monomer in the resin
- Column
- FON 20% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 110°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Phenetole , o-Cresol , Phenol , p-Cresol , m-Cresol , 3,4-Xylenol
- Applications
- Cresol isomer and Phenol (each 1000ppm)
- Column
- Lanoline(Denatured) 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 1.6m×3.2mm
- Column temp.
- 180°C
- Carrier gas
- N2,55ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Oxygen , Nitrogen , Methane , Carbon Monoxide
- Applications
- Gas (O2, N2, CH4, CO)
- Column
- Molecular Sieve 5A 60-80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 50°C
- Carrier gas
- He,40ml/min
- Injection port temp.
- 50°C
- Detector temp.
- 50°C(TCD)
View detail
GC
- Samples
- Methanol , Ethanol , Water
- Applications
- Methanol and Ethanol in water
- Column
- PEG 1000 15% Shimalite F 20-80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 70°C
- Carrier gas
- He,60ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 230°C(TCD)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- Free lower fatty acids in water (3) (each 50ppm)
- Column
- PEG 6000 10% Shimalite TPA 60-80
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Hydrogen Sulfide , Sulfur Dioxide , Methyl Mercaptan , Ethyl Mercaptan , Dimethyl Sulfide , Carbon Disulfide , Benzene , Dimethyl Disulfide
- Applications
- Air pollution sulfur compound (1)
- Column
- PPE-5rings 10% Shimalite TPA 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 70°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 180°C
- Detector temp.
- 180°C(FPD)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Valeric Acid , Isocaproic Acid , Caproic Acid , Methyl Lactate , Dimethyl Succinate
- Applications
- Free lower fatty acids (C2〜C6), Lactic acid methyl and Succinic acid methyl
- Column
- Reoplex 400 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 140°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Methyl Alcohol , Ethyl Alcohol , Isopropyl Alcohol , Ethyl Acetate , Methyl Ethyl Ketone , Benzene , Methyl Isobutyl Ketone , Toluene , Butyl Acetate , Cellosolve , Ethylbenzene , m-Xylene , p-Xylene , o-Xylene , Cyclohexanone
- Applications
- Organic solvents (2)
- Column
- SBS-1 10% Shimalite TPA 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- n-Hexane , Methyl Alcohol , Acetone , Isopropyl Alcohol , Ethyl Acetate , Methyl Ethyl Ketone , Benzene , Trichloroethylene , Isobutyl Alcohol , Isobutyl Acetate , Toluene , n-Butyl Acetate , Isoamyl Alcohol , Ethylbenzene , m-Xylene , o-Xylene , n-Propylbenzene , Cyclohexanone
- Applications
- Organic solvent in the air (ppm level)
- Column
- SBS-100 10% Shimalite TPA 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 110°C
- Carrier gas
- N2,30ml/min
- Injection port temp.
- 200°C
- Detector temp.
- 200°C(FID)
View detail
GC
- Samples
- Flon-113(1,1,2-Trichloro-1,2,2,-Trifluoroethane) , 2-Chloropropane , 1-Chloropropane
- Applications
- Freon113 and Chloropropane
- Column
- SBS-100 10% Shimalite TPA 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 85°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Acetone , Isopropyl Alcohol , n-Hexane , Ethyl Acetate , Chloroform , Carbon Tetrachloride , n-Butyl Alcohol , Methyl Isobutyl Ketone , Isobutyl Acetate , Toluene , n-Butyl Acetate , Ethylbenzene , m-Xylene , o-Xylene , Cyclohexanone , Butyl Cellosolve , 1,1,2,2-Tetrachloroethane , o-Dichlorobenzene
- Applications
- Organic solvent in work environment (2)
- Column
- SBS-200 20% Shimalite W 100-120 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Acetone , Isopropyl Alcohol , n-Hexane , Ethyl Acetate , Chloroform , Carbon Tetrachloride , n-Butyl Alcohol , Methyl Isobutyl Ketone , Isobutyl Acetate , Toluene , n-Butyl Acetate , Ethylbenzene , m-Xylene , o-Xylene , Cyclohexanone , Butyl Cellosolve , 1,1,2,2-Tetrachloroethane , o-Dichlorobenzene
- Applications
- Organic solvents of the atmosphere (ppm level)
- Column
- SBS-200 20% Shimalite W 100-120 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Dichloromethane , trans-1,2-Dichloroethylene , Chloroform , 1,2-Dichloroethane , 1,1,1-Trichloroethane , Carbon Tetrachloride , Trichloroethylene , Toluene , Tetrachloroethylene , Chlorobenzene , 1,1,2,2-Tetrachloroethane , o-Dichlorobenzene
- Applications
- Organic solvents in work environment (3)
- Column
- SBS-300 20% Shimalite W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,30ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Dichloromethane , trans-1,2-Dichloroethylene , Chloroform , 1,2-Dichloroethane , 1,1,1-Trichloroethane , Carbon Tetrachloride , Trichloroethylene , Toluene , Tetrachloroethylene , Chlorobenzene , 1,1,2,2-Tetrachloroethane , o-Dichlorobenzene
- Applications
- Chlorinated solvents of the atmosphere (ppm level)
- Column
- SBS-300 20% Shimalite W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,30ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Methane , Ethane , Ethylene , Propane , Propylene , iso-Butane , n-Butane , 1-Butylene , iso-Butylene , trans-2-Butylene , iso-Pentane , cis-2-Butylene , n-Pentane , 1,3-Butadiene
- Applications
- Lower Hydrocarbons C1〜C5
- Column
- Sebaconitrile 25% Shimalite 60-80 (NAW)
- Column Size
- 12m×3mm(SUS)
- Column temp.
- 40°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 40°C
- Detector temp.
- 40°C(FID)
View detail
GC
- Samples
- Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester , gamma-linolenic Acid Methyl Ester , Arachidonic Acid Methyl Ester , 11,14,17-Eicosadienoic Acid Methyl Ester , 7,10,13,16-Docatetranoic Acid Methyl Ester , Docosapentanoic Acid Methyl Ester
- Applications
- Fatty acid methyl ester in the serum
- Column
- Shinchrom E71 5% Shimalite 80-100 (AW)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 230°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , 5,8,11,14,17-Eicosapentaenoic Acid Methyl Ester , Docosapentanoic Acid Methyl Ester , 4,7,10,13,16,19-Docosahexaenoic Acid Methyl Ester
- Applications
- Fatty acid methyl ester of fish oil (yellow-tail)
- Column
- Shinchrom E71 5% Shimalite 80-100 (AW)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 230°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Benzene , n-Octane , Toluene , n-Nonane , Ethylbenzene , p-Xylene , m-Xylene , o-Xylene , Isopropylbenzene , Styrene , n-Decane , p-Ethyltoluene , o-Ethyltoluene , 1,2,4-Trimethylbenzene
- Applications
- Styrene monomer and Lower Hydrocarbons
- Column
- Shinchrom F51+Bentone 34(6%+2%) Chromosorb W 80-100 (AW‐DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 80°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Ethylbenzene , p-Xylene , m-Xylene , o-Xylene
- Applications
- Xylenol isomer
- Column
- Shinchrom F51+Bentone 34(6%+4%) Chromosorb W 80-100 (AW‐DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 80°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Air , Carbon Monoxide , Methane , Ethane , Carbon Dioxide , Ethylene
- Applications
- Gas (O2, N2, CO, Methan, Ethan, CO2, Ethylene)
- Column
- Silica Gel 60-80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 50°C
- Carrier gas
- He,60ml/min
- Injection port temp.
- 50°C
- Detector temp.
- 50°C(TCD)
View detail
GC
- Samples
- Chloroform , 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Chlorodibromomethane , Tetrachloroethylene , Bromoform
- Applications
- Trihalomethane standard mixed sample (2)
- Column
- Silicone DC 200 20% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 80°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 220°C
- Detector temp.
- 220°C(ECD)
View detail
GC
- Samples
- 1,1,1-Trichloroethane , Carbon Tetrachloride , Trichloroethylene , Tetrachloroethylene
- Applications
- Trihalomethane under drainage
- Column
- Silicone DC 200 20% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 85°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 220°C
- Detector temp.
- 220°C(ECD)
View detail
GC
- Samples
- DDVP , Methyldimethone , Methylparathion , Ethylparathion , EPN
- Applications
- Organic phosphorus system pesticides (3)
- Column
- Silicone DC 200 5% Chromosorb HP 80-100
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C→230°C(4°C/min)
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 270°C(FPD)
View detail
GC
- Samples
- Chloroform , 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Tetrachloroethylene , Chlorodibromomethane , Bromoform
- Applications
- Trihalomethane standard mixed sample (1)
- Column
- Silicone DC 550 20% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 90°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 220°C
- Detector temp.
- 220°C(ECD)
View detail
GC
- Samples
- KC-500
- Applications
- KC-500 Standard samples
- Column
- Silicone OV-1 2% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 210°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 280°C
- Detector temp.
- 280°C(ECD)
View detail
GC
- Samples
- Ethyl Acetate , Acetaldehyde-2,4-Dinitrophenylhydrazone
- Applications
- Acetaldehyde -2,4- dinitrophenylhydrazone
- Column
- Silicone OV-17 1% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 220°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 270°C(FID)
View detail
GC
- Samples
- Estrone , Estriol
- Applications
- Estrone and Estriol
- Column
- Silicone OV-17 1.5% Shimalite W 80-100 (AW-DMCS)
- Column Size
- 1.6m×3.2mm
- Column temp.
- 260°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 290°C
- Detector temp.
- 290°C(FID)
View detail
GC
- Samples
- α-BHC , γ-BHC , β-BHC , δ-BHC , Parathion , PP´-DDE , Endrin , PP´-DDD , PP´-DDT , EPN
- Applications
- Chlorinated pesticide in green tea
- Column
- Silicone OV-17 2% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 270°C(ECD)
View detail
GC
- Samples
- BHT , BHA , Fluorene(I.S.)
- Applications
- BHT and BHA in the margarine
- Column
- Silicone OV-25 3% Shimalite W 80-100 (AW-DMCS)
- Column Size
- 2.6m×3.2mm
- Column temp.
- 165°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C
- Detector
- FID
View detail
GC
- Samples
- Sodium Cyclamate Nitrite , n-Nonane
- Applications
- Sodium Cyclamate Nitrite
- Column
- Silicone SE-30 5% Chromosorb W 60-80 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 190°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- n-Nonane , n-Hedecane , n-Tridecane , n-Pentadecane , n-Heptadecane , n-Nonadecane , n-Heneicosane , Pyrene(I.S.)
- Applications
- The mixed sample of kerosene and light oil
- Column
- Silicone SE-52 5% Shimalite W 60-80 (AW)
- Column Size
- 2.5m×3mm(SUS)
- Column temp.
- 80°C→250°C(6°C/min)
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 270°C(FID)
View detail
GC
- Samples
- Methane , Ethane , Ethylene , Propane , Propylene , iso-Butane , n-Butane , 1-Butene , iso-Butene , trans-2-Butene , cis-2-Butene , iso-Pentane , 1,3-Butadiene , n-Pentane ,
- Applications
- Liquefied petroleum gas (LPG)
- Column
- SM-6
- Column Size
- 6.0 m × 3.0 mm Stainless steel
- Column temp.
- 40°C
- Carrier gas
- He, 25 ml/min
- Injection port temp.
- 40°C
- Detector temp.
- 40°C
- Detector
- TCD
- Injection volume
- 1.0 mL
View detail
GC
- Samples
- Benzene , Toluene , Acetone , iso-Propanol , Ethanol , Isobutanol , Methanol
- Applications
- The impurity component in the carbinol
- Column
- Sorbitol 30% Shimalite 60-80 (NAW)
- Column Size
- 6.1m×3.2mm
- Column temp.
- 110°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Methane , Ethane , Ethylene , Propane , iso-Butane , Propylene , n-Butane
- Applications
- Ethane and ethylene in the exhaust gas
- Column
- Squalane 1% Activated Alumina 60-80
- Column Size
- 1.1m×3.2mm
- Column temp.
- 40°C
- Carrier gas
- N2,30ml/min
- Injection port temp.
- 40°C
- Detector temp.
- 40°C(FID)
View detail
GC
- Samples
- Ethanol , Isopropyl Alcohol , Methyl Ethyl Ketone
- Applications
- Lower alcohol in water and Ketones
- Column
- Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 180°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Methane , Carbon Dioxide , Ethylene , Ethane , Water
- Applications
- Methane CO2 Ethylene Ethane
- Column
- Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 50°C
- Carrier gas
- He,50ml/min
- Injection port temp.
- 150°C
- Detector temp.
- 150°C(TCD)
View detail
GC
- Samples
- Methane , Ethane , Hydrogen Sulfide , Cabonyl Sulfide , Propane , Isobutane , Methyl Mercaptane , n-Butane
- Applications
- Sulfur compounds in Lower Hydrocarbon
- Column
- Sunpak-S 80-100
- Column Size
- 2.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 180°C
- Detector temp.
- 180°C(FPD)
View detail
GC
- Samples
- Ethyleneglycol , Diethyleneglycol , Triethyleneglycol
- Applications
- Glycols (1)
- Column
- TENAX TA 60-80
- Column Size
- 1.1m×3.2mm
- Column temp.
- 180°C→210°C(3°C/min)
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Mono Ethanolamine , Diethanolamine , Triethanolamine
- Applications
- Tri-, di-, monoethanolamine in water
- Column
- TENAX TA 60-80
- Column Size
- 1.1m×3.2mm
- Column temp.
- 160°C→270°C(10°C/min)
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 290°C
- Detector temp.
- 290°C(FID)
View detail
GC
- Samples
- n-Pentane , n-Hexane , n-Heptane , n-Octane , Acrolein , Carbon Tetrachloride , Benzene , Acrylonitrile , Acetonitrile , Perchloroethylene , Toluene , Ethylbenzene , m-Xylene , o-Xylene , n-Dodecane , Styrene monomer , n-Tridecane , p-Xylene
- Applications
- Organic solvent in work environment (1)
- Column
- Thermon-1000 25% Shimalite 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 130°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- 1-Octanol , 1-Decanol , 1-Tetradecanol , 1-Hexadecanol , 1-Octadecanol
- Applications
- Higher Alcohol (1000ppm)
- Column
- Thermon-1000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 65°C→235°C(10°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 280°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- n-Docosane , n-Tricosane , n-Tetracosane , n-Hexacosane , n-Heptacosane , n-Octacosane , n-Nonacosane , n-Triacontane , n-Dotriacontane , n-Tritriacontane
- Applications
- Paraffin wax (3) (m.p.48〜50°C,1000ppm)
- Column
- Thermon-1000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 250°C
- Carrier gas
- N2,80ml/min
- Injection port temp.
- 290°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- Ethanol , Acetonitrile , Isopropanol , n-Hexane
- Applications
- Lower alcohol in water and Hydrocarbon
- Column
- Thermon-1000 5% Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 180°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Methanol , Acetaldehyde , Ethanol , Isopropanol , n-Propanol , Ethyl Acetate , Isobutanol , n-Butanol , Isoamyl Alcohol
- Applications
- Lower alcohol in water
- Column
- Thermon-1000 5% Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 180°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- IPA , Methyl Cellosolve , n-Butanol , 1-Methoxy-2-Propanol , Ethyl Cellosolve , Butyl Cellosolve
- Applications
- Lower alcohol and Cellosolves
- Column
- Thermon-1000 5% Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 170°C→220°C(6°C/min)
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Acrylonitrile , Methyl Methacrylate Monomer , DMF , Chlorobenzene , Styrene Monomer , α-Methylstyrene Monomer , N,N-Dimetylformamide
- Applications
- Residual solvent in the packaging material
- Column
- Thermon-1000 5% Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 220°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C
- Detector
- FID
- Injection volume
- 1 μL
View detail
GC
- Samples
- Methyl Alcohol , Acetaldehyde , Ethyl Alcohol , n-Propyl Alcohol , Isobutyl Alcohol , Isoamyl Alcohol
- Applications
- Aldehyde in the wine and Lower alcohol
- Column
- Thermon-1000 5% Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 140°C→180°C(6°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , Isobutyric Acid , Butyric Acid , Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid
- Applications
- [ Thermon-1000+H3PO4 ] Apprication of Lower free fatty acid
- Column
- Thermon-1000+H3PO4(10%+1%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- TETA(Triethylene Tetramine) , TEPA(Tetraethylene Pentamine)
- Applications
- TETA and TEPA
- Column
- Thermon-1000+KOH(10%+3%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 250°C
- Carrier gas
- N2,55ml/min
- Injection port temp.
- 280°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- o-Phenylenediamine , p-Phenylenediamine , m-Phenylenediamine
- Applications
- Phenylenediamine
- Column
- Thermon-1000+KOH(10%+3%) Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 250°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 280°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- Propyleneglycol , Ethyleneglycol , Decyl Alcohol , 1,4-Butanediol , Diethyleneglycol , Lauryl Alcohol , Myristyl Alcohol , Triethyleneglycol , Cetyl Alcohol , Stearyl Alcohol
- Applications
- Glycol and higher alcohol
- Column
- Thermon-3000 1% Shimalite TPA 60-80
- Column Size
- 1.1m×3.2mm
- Column temp.
- 90°C→180°C(5°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Catechol , Hydroquinone , Resorcinol
- Applications
- Dihydric phenol in water
- Column
- Thermon-3000 1% Shimalite TPA 60-80
- Column Size
- 0.5m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,60ml/min
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Pynacol , Butanediol(1,4) , Pentanediol(1,5) , Hexanediol(1,6) , Heptanediol(1,7) , Octanediol(1,8) , Nonanediol(1,9) , Decanediol(1,10)
- Applications
- Diols (standard mixed sample)
- Column
- Thermon-3000 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 228°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- dl-Camphor , l-Menthol , Methyl Salicylate , Thymol
- Applications
- The component of the liniment
- Column
- Thermon-3000 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 175°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Capsaicine
- Applications
- Capsaicine (Free)
- Column
- Thermon-3000 2% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 260°C
- Carrier gas
- N2,40ml/min
- Injection port temp.
- 290°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- TBZ(Thiabendazole)
- Applications
- Thiabendazole (TBZ,200ppm)
- Column
- Thermon-3000 2% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 1.1m×3.2mm
- Column temp.
- 220°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 270°C
- Detector temp.
- 270°C(FID)
View detail
GC
- Samples
- Diethyl Phthalate , Di-iso-Butyl Phthalate , Di-n-Butyl Phthalate , Di-n-Amyl Phthalate , Diheptyl Phthalate , Dioctyl Phthalate
- Applications
- Phthalic acid ester (2) (200ppm)
- Column
- Thermon-3000 2% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 215°C
- Carrier gas
- N2,65ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Isobutyric Acid , Isovaleric Acid , Isocaproic Acid , Caproic Acid , Enanthic Acid , Lactic Acid
- Applications
- Free lower fatty acids in water and Lactic acid (1)
- Column
- Thermon-3000 3% Shimalite TPA 60-80
- Column Size
- 1.6m×3.2mm
- Column temp.
- 170°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- β-Phenylethyl Acetamide , Lauryl Acetamide
- Applications
- Acetamide
- Column
- Thermon-3000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- α-Pinene , β-Pinene , Limonene , Octyl Aldehyde , Nonyl Aldehyde , Citronellal , Decyl Aldehyde , Linalool , Linalyl Acetate , Isobornyl Acetate(Citronellol) , Menthol , Benzyl Acetate , Perillaldehyde , Geraniol , α-Ionone , Rose-P , C12-Alcohol , Anisaldehyde , Methyl Cinnamate , Ethyl Cinnamate , Eugenol , Heliotropin , DEP , Vanillin , Benzyl Benzoate , Benzyl Salicylate
- Applications
- The mixed sample of perfume component
- Column
- Thermon-3000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 80°C→250°C(6°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 290°C
- Detector temp.
- 280°C(FID)
View detail
GC
- Samples
- Diphenhydramine
- Applications
- Diphenhydramine
- Column
- Thermon-3000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 1.1m×3.2mm
- Column temp.
- 200°C
- Carrier gas
- N2,80ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Nicotine
- Applications
- Nicotine extracted from the tobacco
- Column
- Thermon-3000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 115°C→205°C(8°C/min)
- Carrier gas
- N2,60ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Pyruvic Acid
- Applications
- Pyruvic Acid (Free)
- Column
- Thermon-3000 5% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 2.1m×3.2mm
- Column temp.
- 105°C
- Carrier gas
- N2,30ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Monomethylamine , Dimethylamine , Trimethylamine
- Applications
- Tri-, di-, monomethylamine in Nitrogen
- Column
- Thermon-3000+KOH(5%+1%) Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 150°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 240°C
- Detector temp.
- 240°C(FID)
View detail
GC
- Samples
- Methylamine , Dimethylamine , Trimethylamine
- Applications
- Tri-, di-, monomethylamine in water
- Column
- Thermon-3000+KOH(5%+1%) Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 140°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- Monomethylamine , Dimethylamine , Trimethylamine
- Applications
- Tri-, di-, monomethylamine in water
- Column
- Thermon-3000+KOH(5%+1%) Sunpak-A
- Column Size
- 2.1m×3.2mm
- Column temp.
- 140°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(FID)
View detail
GC
- Samples
- Ethylmercury Chloride , Methylmercury Chloride
- Applications
- Methyl Mercury and Ethylmercury
- Column
- Thermon-HG 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 0.5m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,55ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C(ECD)
View detail
GC
- Samples
- Methylmercury Chloride , Ethylmercury Chloride
- Applications
- Organic mercury (1)
- Column
- Thermon-HG 10% Chromosorb W 80-100 (AW-DMCS)
- Column Size
- 0.5m×3.2mm
- Column temp.
- 160°C
- Carrier gas
- N2,55ml/min
- Injection port temp.
- 260°C
- Detector temp.
- 260°C(ECD)
View detail
GC
- Samples
- Formaldehyde , Methanol , Ethanol
- Applications
- Formalin and Ethanol (1)
- Column
- TSG-1 15% SHINCARBON A 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 90°C
- Carrier gas
- He,40ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 230°C(TCD)
View detail
GC
- Samples
- Formaldehyde , Methanol , Ethanol
- Applications
- Formalin and Ethanol (2)
- Column
- TSG-1 15% SHINCARBON A 60-80
- Column Size
- 3.1m×3.2mm
- Column temp.
- 90°C
- Carrier gas
- He,30ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 230°C(TCD)
View detail
GC
- Samples
- Dimethyl Ether , Methanol , Isopropanol , Methyl Ethyl Ketone , Isopropyl Acetate , 2-Butanol , n-Propyl Acetate , Isobutanol , Dioxane , Methyl Cellosolve , Toluene , Ethyl Cellosolve , N,N-Dimethylformamide , Chlorobenzene , Cellosolve Acetate , Cyclohexanone , Cyclohexanol , 2-Methyl Cyclohexanone , 2-Methyl Cyclohexanol , o-Dichlorobenzene
- Applications
- Organic solvents (4)
- Column
- Ucon LB 550X 20% Chromosorb W 80-100 (AW)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 100°C
- Carrier gas
- N2,50ml/min
- Injection port temp.
- 230°C
- Detector temp.
- 230°C(FID)
View detail
GC
- Samples
- 2,6-Xylenol , p-Cresol , m-Cresol , 2,4,6-Trimethylphenol , 2,4-Xylenol , 2,5-Xylenol , 2,3,6-Trimethylphenol , 2,3-Xylenol , p-Ethylphenol , m-Ethylphenol , 3,5-Xylenol , 3,4-Xylenol
- Applications
- Analysis of the impurity in the 3,5- xylenol ( 10% benzene solution )
- Column
- ULBON ALPhen
- Column Size
- 50m×0.20mm
- Column temp.
- 130°C
- Carrier gas
- N2,0.39ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.5μm
View detail
GC
- Samples
- Phenol , 2,6-Xylenol , o-Cresol , p-Cresol , m-Cresol , o-Ethylphenol , 2,4,6-Trimethylphenol , 2,4-Xylenol , 2,5-Xylenol , 2,3,6-Trimethylphenol , 2,3-Xylenol , p-Ethylphenol , m-Ethylphenol , 3,5-Xylenol , 3,4-Xylenol , 2,3,5-Trimethylphenol
- Applications
- Alkylphenol isomer
- Column
- ULBON ALPhen (WCOT)
- Column Size
- 50m×0.20mm
- Column temp.
- 130°C
- Carrier gas
- N2,0.39ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- o-Ethoxybenzamide , Phenacetin , Caffeine , Aminopyrine , Chlorpheniramine Maleate
- Applications
- Medicine
- Column
- ULBON HR-1
- Column Size
- 15m×0.53mm(1.0μm)
- Column temp.
- 180°C
- Carrier gas
- He,7.2ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Cholesterol , Cholestanol
- Applications
- Cholestanols, Cholesterol
- Column
- ULBON HR-1
- Column Size
- 50m×0.25mm(0.25μm)
- Column temp.
- 300°C
- Carrier gas
- He,0.65ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 0.8μl
View detail
GC
- Samples
- Cholesterol , Cholesterol Acetate , Cholesterol Propionate , Cholesterol Isobutyrate , Cholesterol n-Butyrate , Cholesterol n-Valerate , Cholesterol n-Caproate , Cholesterol n-Octanoate , Cholesterol n-Decanoate , Cholesterol Laurate , Cholesterol Myristate
- Applications
- Cholesterol ester
- Column
- ULBON HR-1
- Column Size
- 25m×0.25mm(0.15μm)
- Column temp.
- 250°C→330°C(5°C/min)
- Carrier gas
- He,1.3ml/min
- Detector temp.
- 340°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Brassicasterol , Campesterol , Stigmasterol , β-Sitosterol
- Applications
- Plant sterols
- Column
- ULBON HR-1
- Column Size
- 30m×0.53mm(1.0μm)
- Column temp.
- 290°C
- Carrier gas
- He,7.1ml/min
- Detector temp.
- 320°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Naphthalene , Biphenyl , Fluorene , Phenanthrene , Anthracene , o-Terphenyl , Fluoranthene , Pyrene , m-Terphenyl , p-Terphenyl , Chrysene , 4,5-Benzpyrene , 1,2-Benzpyrene , Perylene
- Applications
- Polycyclic aromatic hydrocarbon
- Column
- ULBON HR-1
- Column Size
- 50m×0.25mm(0.25μm)
- Column temp.
- 200°C→320°C(4°C/min)
- Carrier gas
- He,068ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- n-Hexacosane , n-Hexatriacontane
- Applications
- Paraffin wax (1) (m.p.68〜70°C)
- Column
- ULBON HR-1
- Column Size
- 25m×0.25mm(0.15μm)
- Column temp.
- 200°C→320°C(6°C/min)
- Carrier gas
- He,0.74ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 2μl
View detail
GC
- Samples
- n-Eicosane , n-Pentacosane
- Applications
- Paraffin wax (3) (m.p.48〜50°C)
- Column
- ULBON HR-1
- Column Size
- 25m×0.25mm(0.15μm)
- Column temp.
- 200°C→320°C(6°C/min)
- Carrier gas
- He,0.74ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Dimethyl Phthalate , Diethyl Phthalate , Diallyl Phthalate , Di-iso-Butyl Phthalate , Di-n-Butyl Phthalate , Di-n-Amyl Phthalate , Di-2-Ethylhexyl Phthalate , Di-n-Octyl Phthalate
- Applications
- Phthalic acid ester (1)
- Column
- ULBON HR-1
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 180°C→300°C(6°C/min)
- Carrier gas
- He,0.98ml/min
- Detector temp.
- 320°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- n-Pentane , n-Hexane , Benzene , iso-Octane , Toluene , Ethylbenzene , m-Xylene , o-Xylene , p-Xylene
- Applications
- Premium gasoline
- Column
- ULBON HR-1
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→220°C(4°C/min)
- Carrier gas
- He,0.75ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- DDVP , Methyldimethone , Methylparathion , Ethylparathion , EPN
- Applications
- Organic phosphorus system pesticides (1)
- Column
- ULBON HR-1
- Column Size
- 15m×0.53mm(1.0μm)
- Column temp.
- 150°C→220°C(6°C/min)
- Carrier gas
- He,10.7ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.8μl
View detail
GC
- Samples
- Solvents
- Applications
- Solvents (5)
- Column
- ULBON HR-1
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→120°C(2°C/min)
- Carrier gas
- He,0.93ml/min
- Detector temp.
- 150°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- n-Pentane , n-Hexane , Benzene , iso-Octane , Toluene , Ethylbenzene , m-Xylene , o-Xylene , p-Xylene
- Applications
- Regular gasoline
- Column
- ULBON HR-1
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→220°C(4°C/min)
- Carrier gas
- He,0.75ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Cholesterol , Brassicasterol , Campesterol , Stigmasterol , β-Sitosterol
- Applications
- Cholesterol and Plant sterols
- Column
- ULBON HR-17
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 290°C
- Carrier gas
- He,1.5ml/min
- Detector temp.
- 310°C(FID)
- Injection volume
- 1.5μl
View detail
GC
- Samples
- Methanol , Ethyl Ether , Isopropanol , trans-1,2-Dichloroethylene , Ethyl Acetate , Chloroform , Isobutanol , Trichloroethylene , n-Butanol , 1,4-Dioxane , Toluene , Tetrachloroethylene , n-Butyl Acetate , Ethylbenzene , p-Xylene , Isoamyl Acetate , o-Xylene , n-Amyl Acetate , Cyclohexanol , Cyclohexanone , 2-Methylcyclohexanol , 2-Methylcyclohexanone , p-Dichlorobenzene , o-Dichlorobenzene , o-Cresol , m-Cresol
- Applications
- The work environment (2)
- Column
- ULBON HR-1701
- Column Size
- 30m×0.53mm(5μm)
- Column temp.
- 60°C→180°C(4°C/min)
- Carrier gas
- He,10ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1ml
View detail
GC
- Samples
- Sucrose , Maltose , Lactose , Raffinose
- Applications
- Sugar
- Column
- ULBON HR-1701
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 180°C→280°C(4°C/min)
- Carrier gas
- He,0.49ml/min
- Detector temp.
- 300°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Methanol , Ethanol , Acetone , IPA , n-Propanol , Ethyl Acetate , MEK , Chloroform , Benzene , n-Butanol , Toluene , MIBK , Isobutyl Acetate , n-Butyl Acetate , Ethylbenzene , m-Xylene , o-Xylene , Cellosolve Acetate
- Applications
- Solvents (2)
- Column
- ULBON HR-1701
- Column Size
- 25m×0.32mm(0.5μm)
- Column temp.
- 40°C→90°C(2°C/min)
- Carrier gas
- He,0.83ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Solvents (4)
- Applications
- Solvents (4)
- Column
- ULBON HR-1701
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→180°C(4°C/min)
- Carrier gas
- He,1.4ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Benzene , Acrylonitrile , Toluene , Ethylbenzene , iso-Propylbenzene , n-Propylbenzene , Styrene Monomer , N,N-Dimethylformamide
- Applications
- Styrene monomer (10ppm) in DMF
- Column
- ULBON HR-20M
- Column Size
- 30m×0.53mm(5.0μm/min)
- Column temp.
- 120°C
- Carrier gas
- He,10ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 2μl
View detail
GC
- Samples
- Capric Acid Methyl Ester , Lauric Acid Methyl Ester , Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoc Acid Methyl Ester , Linoleic Acid Methyl Ester , Linoelaidic Acid Methyl Ester , Arachidic Acid Methyl Ester , cis-11-Eicosenoic Acid Methyl Ester , Behenic Acid Methyl Ester , Erucic Acid Methyl Ester , 7,10,13,16-Docatetranoic Acid Methyl Ester , Lignoceric Acid Methyl Ester , Nervonic Acid Methyl Ester
- Applications
- Fatty acid methyl esters
- Column
- ULBON HR-20M
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 130°C→240°C(4°C/min)
- Carrier gas
- He,1.1ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 1.0μm
View detail
GC
- Samples
- Acetic Acid , Propionic Acid , iso-Butyric Acid , n-Butyric Acid , iso-Valeric Acid , iso-Caproic Acid , n-Caproic Acid , n-Heptanoic Acid
- Applications
- Lower fatty Acid in water
- Column
- ULBON HR-20M
- Column Size
- 30m×0.53mm(3.0μm)
- Column temp.
- 150°C
- Carrier gas
- He,10.5ml/min
- Detector temp.
- 280°C(FID)
- Injection volume
- 0.4μl
View detail
GC
- Samples
- Acetaldehyde , Ethyl Acetate , Ethanol , 1-Propanol , 3-Pentanol , 2-Methyl-1-Butanol , 3-Methyl-1-Butanol
- Applications
- Scotch whisky
- Column
- ULBON HR-20M
- Column Size
- 50m×0.32mm(1.0μm)
- Column temp.
- 60°C→240°C(5°C/min)
- Carrier gas
- He,4.0ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.6μl
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , p-Xylene , m-Xylene , iso-Propylbenzene , o-Xylene , n-Propylbenzene , p-Ethyltoluene , m-Ethyltoluene , o-Ethyltoluene , 1,2,5-Trimethylbenzene , 1,2,4-Trimethylbenzene , 1,2,3-Trimethylbenzene , Naphthalene
- Applications
- Aromatic hydrocarbons in Premium gasoline
- Column
- ULBON HR-20M
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 50°C→180°C(2°C/min)
- Carrier gas
- He,1.04ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.2μl
View detail
GC
- Samples
- n-Butyl Formate , n-Butyl Acetate , n-Butyl Propionate , n-Butyl iso-Butyrate , n-Butyl n-Butyrate , n-Butyl Crotonate , n-Butyl n-Caproate , n-Butyl Lactate , n-Butyl n-Caprate , Di-n-Butyl Oxalate , n-Butyl Benzoate , Di-n-Butyl Malonate , Di-n-Butyl Fumarate , Di-n-Butyl Succinate , Di-n-Butyl Maleate , Di-n-Butyl Adipate , Di-n-Butyl Maleate , Di-n-Butyl Phthalate , Di-n-Butyl Sebacate , Di-n-Butyl Isophthalate , Di-n-Butyl Terephthalate , Tri-n-Butyl Citrate
- Applications
- Organic acid butyl ester
- Column
- ULBON HR-20M
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 80°C→240°C(4°C/min)
- Carrier gas
- He,1.1ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 1.0μm
View detail
GC
- Samples
- n-Hexane , Ethyl Ether , Acetone , Methyl Acetate , trans-1,2-Dichloroethylene , Methanol , Isopropyl Acetate , Isopropanol , Dichloromethane , n-Propyl Acetate , cis-1,2-Dichloroethylene , Methyl Isobutyl Ketone , Chloroform , Toluene , 1,4-Dioxane , Isobutanol , Isoamyl Acetate , Ethylbenzene , p-Xylene , m-Xylene , Methyl Cellosolve , o-Xylene , Ethyl Cellosolve , Styrene , Cellosolve Acetate , N,N-Dimethylformamide , 4-Methylcyclohexanone , Butyl Cellosolve , cis-4-Methylcyclohexanol , m-Dichlorobenzene , p-Dichlorobenzene , trans-4-Methylcyclohexanol , o-Dichlorobenzene , o-Cresol , p-Cresol , m-Cresol
- Applications
- Solvents (6)
- Column
- ULBON HR-20M
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→240°C(3°C/min)
- Carrier gas
- He,1.3ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , p-Xylene , m-Xylene , iso-Propylbenzene , o-Xylene , n-Propylbenzene , p-Ethyltoluene , m-Ethyltoluene , o-Ethyltoluene , 1,2,5-Trimethylbenzene , 1,2,4-Trimethylbenzene , 1,2,3-Trimethylbenzene , Naphthalene
- Applications
- Aromatic hydrocarbons in Regular gasoline
- Column
- ULBON HR-20M
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 50°C→180°C(2°C/min)
- Carrier gas
- He,1.04ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 0.2μl
View detail
GC
- Samples
- n-Octadecane , n-Docosane
- Applications
- Higher alcohol in Calnaubawax
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 200°C→320°C(5°C/min)
- Carrier gas
- He,0.5ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 1.2μl
View detail
GC
- Samples
- Arachidic Acid Methyl Ester , Behenic Acid Methyl Ester , Lignoceric Acid Methyl Ester , Cerotic Acid Methyl Ester , Montanic Acid Methyl Ester , Melissic Acid Methyl Ester
- Applications
- Higher fatty acid esters in Calnaubawax
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 200°C→320°C(5°C/min)
- Carrier gas
- He,0.5ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Campesterol , Stigmasterol , β-Sitosterol
- Applications
- Plant sterol in the rice bran oil
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 250°C→320°C(5°C/min)
- Carrier gas
- He,0.5ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Methanol , Acetone , Dichloromethane , trans-1,2-Dichloroethylene , n-Hexane , Ethyl Acetate , Tetrahydrofuran , 1,1,1-Trichloroethane , Carbon Tetrachloride , Trichloroethylene , Methyl Isobutyl Ketone , Toluene , Methyl Butyl Ketone , Tetrachloroethylene , Chlorobenzene , Ethylbenzene , p-Xylene , Styrene , 1,1,2,2-Tetrachloroethane , 2-Methylcyclohexanone , 4-Methylcyclohexanone , m-Dichlorobenzene , p-Dichlorobenzene , o-Cresol , p-Cresol
- Applications
- The work environment (1)
- Column
- ULBON HR-52
- Column Size
- 30m×0.53mm(5μm)
- Column temp.
- 60°C→130°C(3°C/min)
- Carrier gas
- He,8.0ml/min
- Detector temp.
- 150°C(FID)
- Injection volume
- 1ml
View detail
GC
- Samples
- n-Octylamine , n-Decylamine , Laurylamine , n-Tetradecylamine , Cetylamine , Stearylamine
- Applications
- Aliphatic amine
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.25μm)
- Column temp.
- 150°C→230°C(4°C/min)
- Carrier gas
- He,0.48ml/min
- Detector temp.
- 250°C(FID)
- Injection volume
- 1.5μl
View detail
GC
- Samples
- Dehydroepiandrosterone , Estrone , Cholestane , Progesterone , Estriol , Cholesterol , Lanosterol
- Applications
- Sterol
- Column
- ULBON HR-52
- Column Size
- 50m×0.25mm(0.25μm)
- Column temp.
- 250°C→320°C(4°C/min)
- Carrier gas
- He,0.57ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 2μl
View detail
GC
- Samples
- Methanol , Ethanol , Acetone , n-Propanol , n-Hexane , Ethyl Acetate , Chloroform , Benzene , MIBK , Toluene , Isobutyl Acetate , n-Butyl Acetate , Ethylbenzene , m-Xylene , o-Xylene , Cellosolve Acetate
- Applications
- Solvents (1)
- Column
- ULBON HR-52
- Column Size
- 25m×0.32mm(0.5μm)
- Column temp.
- 40°C→90°C(2°C/min)
- Carrier gas
- He,0.83ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- n-Hexacosane , n-Hexatriacontane
- Applications
- Paraffin wax (2) (m.p.68〜70°C)
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.15μm)
- Column temp.
- 200°C→320°C(6°C/min)
- Carrier gas
- He,0.7ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 2μl
View detail
GC
- Samples
- n-Eicosane , n-Pentacosane
- Applications
- Paraffin wax (4) (m.p.48〜50°C)
- Column
- ULBON HR-52
- Column Size
- 25m×0.25mm(0.15μm)
- Column temp.
- 200°C→320°C(6°C/min)
- Carrier gas
- He,0.7ml/min
- Detector temp.
- 330°C(FID)
- Injection volume
- 0.5μl
View detail
GC
- Samples
- Methanol , Acetone , Dichloromethane , trans-1,2-Dichloroethylene , n-Hexane , Ethyl Acetate , Tetrahydrofuran , 1,1,1-Trichloroethane , Carbon Tetrachloride , Trichloroethylene , 1,4-Dioxane , Methyl Isobutyl Ketone , Toluene , Methyl n-Butyl Ketone , n-Butyl Acetate , Tetrachloroethylene , Chlorobenzene , Ethylbenzene , p-Xylene , Styrene , o-Xylene , Butyl Cellosolve , 1,1,2,2-Tetrachloroethane , 3-Methylcyclohexanol(cis, trans) , 2-Methylcyclohexanone , 4-Methylcyclohexanone , m-Dichlorobenzene , p-Dichlorobenzene , o-Dichlorobenzene , o-Cresol , p-Cresol
- Applications
- Solvents (3)
- Column
- ULBON HR-52
- Column Size
- 50m×0.25mm(0.5μm)
- Column temp.
- 60°C→130°C(3°C/min)
- Carrier gas
- He,1.2ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester
- Applications
- Fatty acid methyl ester of the carp
- Column
- ULBON HR-SS-10
- Column Size
- 25m×0.25mm
- Column temp.
- 170°C→200°C(2°C/min)
- Carrier gas
- He,1.5ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester , 5,8,11,14,17-Eicosapentaenoic Acid Ethyl Ester , Docosapentanoic Acid Methyl Ester , 4,7,10,13,16,19-Docosahexaenoic Acid Methyl Ester
- Applications
- Fatty acid methyl ester of the yellow-tail
- Column
- ULBON HR-SS-10
- Column Size
- 25m×0.25mm
- Column temp.
- 150°C→220°C(2°C/min)
- Carrier gas
- He,1.5ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Capric Acid Methyl Ester , Lauric Acid Methyl Ester , Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Oleoic Acid Methyl Ester , Stearic Acid Methyl Ester , Elaidic Acid Methyl Ester , Linoelaidic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester , Arachidic Acid Methyl Ester , cis-11-Eicosenoic Acid Methyl Ester , Behenic Acid Methyl Ester , Erucic Acid Methyl Ester , Lignoceric Acid Methyl Ester , Nervonic Acid Methyl Ester , 4,7,10,13,16,19-Docosahexaenoic Acid Methyl Ester
- Applications
- Standard data Fatty acid methyl ester standard (2)
- Column
- ULBON HR-SS-10
- Column Size
- 50m×0.32mm
- Column temp.
- 150°C→220°C(3°C/min)
- Carrier gas
- He,3.4ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Myristic Acid Methyl Ester , Palmitic Acid Methyl Este , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester , 5,8,11,14,17-Eicosapentaenoic Acid Ethyl Ester , Docosapentanoic Acid Methyl Ester , 4,7,10,13,16,19-Docosahexaenoic Acid Methyl Ester
- Applications
- Fatty acid methyl ester of the tuna ( trolley )
- Column
- ULBON HR-SS-10
- Column Size
- 25m×0.25mm
- Column temp.
- 150°C→220°C(2°C/min)
- Carrier gas
- He,1.5ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Triglyceride
- Applications
- The oil ball
- Column
- ULBON HR-TGC1
- Column Size
- 25m×0.25mm(0.1μm)
- Column temp.
- 100°C→390°C(8°C/min)
- Carrier gas
- He,1.5kg/cm2
- Detector temp.
- 390°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Triglyceride
- Applications
- Calnaubawax
- Column
- ULBON HR-TGC1
- Column Size
- 25m×0.25mm(0.1μm)
- Column temp.
- 250°C→380°C(5°C/min)
- Carrier gas
- He,1.3kg/cm2
- Detector temp.
- 390°C(FID)
- Injection volume
- 0.2μl
View detail
GC
- Samples
- Triglyceride
- Applications
- Triglyceride
- Column
- ULBON HR-TGC1
- Column Size
- 25m×0.25mm(0.1μm)
- Column temp.
- 250°C→380°C(5°C/min)
- Carrier gas
- He,1.3kg/cm2
- Detector temp.
- 390°C(FID)
- Injection volume
- 0.2μl
View detail
GC
- Samples
- Capric Acid Methyl Ester , Lauric Acid Methyl Ester , Myristic Acid Methyl Ester , Palmitic Acid Methyl Ester , Palmitoleic Acid Methyl Ester , Stearic Acid Methyl Ester , Oleoic Acid Methyl Ester , Linoleic Acid Methyl Ester , Linolenic Acid Methyl Ester , Arachidic Acid Methyl Ester , cis-11-Eicosenoic Acid Methyl Ester , Behenic Acid Methyl Ester , Erucic Acid Methyl Ester , 4,7,10,13,16,19-Docosahexaenoic Acid Methyl Ester , Lignoceric Acid Methyl Ester , Nervonic Acid Methyl Ester
- Applications
- Standard data Fatty acid methyl ester standard (1)
- Column
- ULBON HR-Thermon-3000B
- Column Size
- 50m×0.25mm
- Column temp.
- 180°C→220°C(1°C/min)
- Carrier gas
- He,1.7ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- α-Pinene , β-Pinene , Limonene , Linalool , Linalyl Acetate , Benzyl Acetate , Phenethyl Alcohol
- Applications
- perfume (1)
- Column
- ULBON HR-Thermon-600T
- Column Size
- 50m×0.25mm
- Column temp.
- 70°C→230°C(4°C/min)
- Carrier gas
- He,1.1ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- β-Pinene , Limonene , Linalool , Linalyl Acetate , Benzyl Acetate , α-Ionene , Phenethyl Alcohol , Lauryl Alcohol , Eugenol , Diethyl Phthalate , Vanillin , Benzyl Salicylate
- Applications
- perfume (2)
- Column
- ULBON HR-Thermon-600T
- Column Size
- 50m×0.25mm
- Column temp.
- 70°C→230°C(4°C/min)
- Carrier gas
- He,1.1ml/min
- Detector temp.
- 250°C(FID)
View detail
GC
- Samples
- Methyl Mercuric Chloride , Ethyl Mercuric Chloride
- Applications
- Alkyl Mercury
- Column
- ULBON HR-Thermon-HG
- Column Size
- 15m×0.53mm
- Column temp.
- 150°C
- Carrier gas
- N2,4.5ml/min
- Detector temp.
- 220°C(ECD)
- Injection volume
- 1μl
View detail
GC
- Samples
- Tri-n-Butyltin Chloride
- Applications
- Tri-n-Butyltin Chloride
- Column
- ULBON HR-Thermon-HG
- Column Size
- 15m×0.53mm
- Column temp.
- 150°C
- Carrier gas
- N2,4.5ml/min
- Detector temp.
- 220°C(ECD)
- Injection volume
- 1μl
View detail
GC
- Samples
- n-Hexane, Benzene , n-Octane , Toluene , n-Nonane , Ethylbenzene , p-Xylene , m-Xylene , o-Xylene , Isopropylbenzene , Styrene , n-Propylbenzene , p-Ethyltoluene , m-Ethyltoluene , o-Ethyltoluene , 1,3,5-Trimethylbenzene , 1,2,4-Trimethylbenzene , 1,2,3-Trimethylbenzene , 4-n-Propyltoluene , 3-n-Propyltoluene , 2-n-Propyltoluene , 1,2,3,5-Tetramethylbenzene , 1,2,4,5-Tetramethylbenzene , 1,2,3,4-Tetramethylbenzene
- Applications
- Alkyl benzene isomer
- Column
- ULBON Xylene Master
- Column Size
- 50m×0.32mm
- Column temp.
- 70°C→120°C(2°C/min)
- Carrier gas
- He,1.4ml/min
- Detector temp.
- 200°C(FID)
- Injection volume
- 1μl
View detail
GC
- Samples
- Carbon Disulfide , Hydrogen Sulfide , Methyl Mercaptan ,Ethyl Mercaptan , DMS , Benzene . DMDS
- Applications
- Air pollution sulfur compound (3)
- Column
- β,β-ODPN 25% Chromosorb W 60-80 (AW-DMCS-ST)
- Column Size
- 3.1m×3.2mm
- Column temp.
- 70°C
- Carrier gas
- N2,50ml/min
- Detector temp.
- 180°C(FPD)
- Injection volume
- -
View detail
GC
- Samples
- kerosene
- Applications
- Analysis of the kerosene
- Column
- ULBON HR-1
- Column Size
- 0.25mmI.D. × 50m (0.5um)
- Column temp.
- 90°C → 200°C (2°C/min.)
- Carrier gas
- He
- Detector temp.
- 250°C
- Injection volume
- 0.5ul
View detail
GC
- Samples
- Chloroform , Fenitrothion , Fluoranthene
- Applications
- Analysis of fenitrothion using Shinwasorb
- Column
- Polyphenyl Ether (5 rings) 1.5% Shinwasorb-S 100/120
- Column Size
- 1.1 m x 3.2 mm I.D. Glass
- Column temp.
- 195℃
- Carrier gas
- 55 mL/min N₂
- Injection port temp.
- 230℃
- Detector temp.
- 230℃
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Carbonyl sulfide , Hydrogen sulfide , Carbon disulfide , Methyl mercaptan , Ethyl mercaptan , Dimethyl sulfide , Dimethyl disulfide
- Applications
- Analysis of methyl mercaptan, hydrogen sulfide, dimethyl sulfide, and dimethyl disulfide using Shinwasorb
- Column
- β,β’-Oxydipropionitrile 12.5% Shinwasorb-S 60/80 ST
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 70℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 180℃
- Detector temp.
- 180℃
- Detector
- FPD (S)
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Trimethylamine , Dimethylamine , Methylamine
- Applications
- Analysis of methylamines using Shinwasorb
- Column
- Diglycerol+TEP+KOH 7.5+7.5+1% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 70℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 220℃
- Detector temp.
- 220℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- PCBs
- Applications
- Analysis of PCBs using Shinwasorb
- Column
- Silicone OV-17 2% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 210℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- ECD
- Injection volume
- 4.0 μL
View detail
GC
- Samples
- PCBs
- Applications
- Analysis of PCBs using Shinwasorb
- Column
- Silicone OV-1 2% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 195℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- ECD
- Injection volume
- 4.0 μL
View detail
GC
- Samples
- H2 , HD , D2
- Applications
- Analysis of deuterium (heavy hydrogen)
- Column
- Shinwa OGO-SP
- Column Size
- 3.0 m x 3.0 mm I.D. Stainless steel
- Column temp.
- -196℃
- Carrier gas
- 60 mL/min He
- Injection port temp.
- 40℃
- Detector temp.
- 100℃
- Detector
- TCD 120 mA
- Injection volume
- 1.0 mL
View detail
GC
- Samples
- Ethylene oxide , Propylene oxide
- Applications
- Measurement of ethylene oxide using Shinwasorb
- Column
- Flexol 8N8 12.5% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 150℃
- Carrier gas
- 40 mL/min N₂
- Injection port temp.
- 150℃
- Detector temp.
- 150℃
- Detector
- FID
- Injection volume
- 100 μL
View detail
GC
- Samples
- Dichlorvos (DDVP) , Methyldemeton , Methyl parathion , Parathion , EPN
- Applications
- Measurement of organophosphorus compounds using Shinwasorb
- Column
- Silicone OV-17 1% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 180-250℃ (8℃/min)
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FPD
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- 2,6-Xylenol , o-Cresol , Phenol , 2,4-Xylenol , p-Cresol , m-Cresol , 3,5-Xylenol , 3,4-Xylenol
- Applications
- Measurements of cresol and xylenol isomers using Shinwasorb
- Column
- FAP-S Shinwasorb-U 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 160℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250℃
- Detector temp.
- 250℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Ethylbenzene , p-Xylene , m-Xylene , o-Xylene
- Applications
- Measurement of xylene isomers using Shinwasorb
- Column
- Shinchrom F51+Bentone 34 3+2% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 80℃
- Carrier gas
- 40 mL/min N₂
- Injection port temp.
- 240℃
- Detector temp.
- 240℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Dichloromethane , trans-1,2-Dichloroethylene , Chloroform , 1,2-Dichloroethane , 1,1,1-Trichloroethane , Carbon tetrachloride , Trichloroethylene , Toluene , Tetrachloroethylene , Chlorobenzene , 1,1,2,2,-Tetrachloroethane , o-Dichlorobenzene
- Applications
- Measurement of chlorinated solvents in air using Shinwasorb
- Column
- SBS-300 10% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 100℃
- Carrier gas
- 30 mL/min N₂
- Injection port temp.
- 240℃
- Detector temp.
- 240℃
- Detector
- FID
- Injection volume
- 1.0 mL
View detail
GC
- Samples
- 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Chlorodibromomethane , Tetrachloroethylene , Bromoform
- Applications
- Measurements of trihalomethanes using Shinwasorb -1-
- Column
- Silicone DC-200 10% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 100℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 240℃
- Detector temp.
- 240℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- 1,1,1-Trichloroethane , Trichloroethylene , Bromodichloromethane , Chlorodibromomethane , Tetrachloroethylene , Bromoform
- Applications
- Measurements of trihalomethanes using Shinwasorb -2-
- Column
- Silicone DC-550 10% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 90℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 220℃
- Detector temp.
- 220℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Acetic acid , Propionic acid , Isobutyric acid , Butyric acid , Isovaleric acid , Valeric acid , Isocaproic acid , Capric acid , Enanthic acid
- Applications
- Measurement of short-chain free fatty acids using Shinwasorb -1-
- Column
- Thermon-1000+H3PO4 2.5+0.25% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 150℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250℃
- Detector temp.
- 240℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Acetic acid , Propionic acid , Isobutyric acid , Butyric acid , Isovaleric acid , Valeric acid , Isocaproic acid , Capric acid , Enanthic acid
- Applications
- Measurement of short-chain free fatty acids using Shinwasorb -2-
- Column
- FAL-M Shinwasorb-S 60/80 PA
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 150℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene monomer , Cyclopentanol , N,N-Dimethylformamide
- Applications
- Measurement of styrene monomer in DMF using Shinwasorb
- Column
- FON 10% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 110℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 230℃
- Detector temp.
- 230℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Mixture of 22 organic solvents
- Applications
- Measurement of organic solvents using Shinwasorb -2-
- Column
- PEG1500 12.5% Shinwasorb-U 40/60
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 60~120℃ (4℃/min)
- Carrier gas
- 40 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 200℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Propyleneglycol , 1,3-propanediol
- Applications
- Measurement of food additives using Sunpak-A
- Column
- Sunpak-A 50/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 180℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 230℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Propyleneglycol , 1,3-propanediol
- Applications
- Measurement of food additives using Sunpak-A
- Column
- Sunpak-A 50/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 180℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 230℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Sorbic acid , Dehydroacetic acid , Benzoic acid , trans-Stilbene
- Applications
- Analysis of preservatives using Shinwasorb -1-
- Column
- DEGS+H3PO4 5.0+0.5% Shinwasorb-S 40/60
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 185℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- preservatives
- Applications
- Analysis of preservatives using Shinwasorb -2-
- Column
- Advance-DS+H3PO4 2+0.25% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 200℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 260℃
- Detector temp.
- 260℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Methyl iodide , iso-Propyl iodide , n-Octane , o-Xylene
- Applications
- Analysis of hypromellose using Shinwasorb
- Column
- Silicone DC-200 10% Shinwasorb-S 100/120
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 90℃
- Carrier gas
- 38 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 200℃
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Carbon sulfide , Hydrogen sulfide , Carbon disulfide , Methyl mercaptan , Ethyl mercaptane , Dimethyl sulfide
- Applications
- Measurements of offensive odor substances using Shinwasorb -3-
- Column
- 1,2,3-TCEP 25% Shinwasorb-S 80/100 ST
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 70℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 180℃
- Detector temp.
- 180℃
- Detector
- FPD
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Fragrance
- Applications
- Measurements of fragrance using Shinwasorb
- Column
- Thermon-3000 5% Shinwasorb-S 80/100
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 80~260℃(6℃/min)
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 280℃
- Detector temp.
- 280℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Chloroform , Ethanol , Naphthalene , Amantadine
- Applications
- Measurements of amantadine hydrochloride using Shinwasorb
- Column
- Apiezone L+KOH 2+1% Shinwasorb-S 80/100
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 125℃(5 min hold)~150℃(5℃/min)~150℃ (10 min hold)
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 200℃
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- 200 ppm in hexane
- Applications
- Measurements of eucalyptus oil using Shinwasorb
- Column
- Thermon-3000 5% Shinwasorb-S 80/100
- Column Size
- 5.1 m x 3.2 mm I.D. Glass
- Column temp.
- 120℃ & 130℃
- Carrier gas
- 40 mL/min N₂
- Injection port temp.
- 200℃
- Detector temp.
- 200℃
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Benzene , Toluene , Ethylbenzene , Isopropylbenzene , n-Propylbenzene , Styrene monomer , Cyclopentanol , N, N-Dimethylformamide ,
- Applications
- Measurement of styrene monomer in DMF using Shinwasorb
- Column
- FFAP 10% Shinwasorb-U 60/80
- Column Size
- 3.1m×3.2mm glass
- Column temp.
- 120°C
- Carrier gas
- 50 mL/min N2
- Injection port temp.
- 240°C
- Detector temp.
- 240°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- decane , undecane , dodecane , tridecane , tetradecane , pentadecane , hexadecane , heptadecane , octadecane , nonadecane , eicosane , heneicosane , docosane
- Applications
- Analysis of mixture of kerosene and gas oil using Shinwasorb
- Column
- Silicone SE-52 5% Shinwasorb-U 40/60
- Column Size
- 2.5 m x 3.0 mm I.D. Stainless steel
- Column temp.
- 80~250℃ (6℃/min), 250℃ (12 min hold)
- Carrier gas
- 50 mL/min N2
- Injection port temp.
- 270°C
- Detector temp.
- 270°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Ethyl acetate , di-n-butyl phthalate , Teprenone (mono-cis isomer) , Teprenone (all-trans isomer) , ,
- Applications
- Analysis of teprenone using Shinwasorb -1-
- Column
- FFAP 5% Shinwasorb-U 80/100
- Column Size
- 2.1m×3.2mm glass
- Column temp.
- 235°C
- Carrier gas
- 47 mL/min N2
- Injection port temp.
- 270°C
- Detector temp.
- 270°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- n-valeric acid , valproic acid
- Applications
- Analysis of valproate sodium using Shinwasorb
- Column
- DEGA+H3PO4 2.5+0.5% Shinwasorb-S 80/100
- Column Size
- 2.1m×3.2mm glass
- Column temp.
- 145°C
- Carrier gas
- 35 mL/min N2
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Ethanol , Dl-camphor , Methyl salicylate ,
- Applications
- Analysis of dl-camphor using Shinwasorb
- Column
- PEG 20M 5% Shinwasorb-S 60/80
- Column Size
- 3.1m×3.2mm glass
- Column temp.
- 160°C
- Carrier gas
- 45 mL/min N2
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Ethyl acetate , di-n-butyl phthalate , Teprenone (mono-cis isomer) , Teprenone (all-trans isomer) , ,
- Applications
- Analysis of teprenone using Shinwasorb -2-
- Column
- FFAP 5% Shinwasorb-U 80/100
- Column Size
- 2.1m×3.2mm glass
- Column temp.
- 235°C
- Carrier gas
- 47 mL/min N2
- Injection port temp.
- 270°C
- Detector temp.
- 270°C
- Detector
- FID
- Injection volume
- 2.0 µL
View detail
GC
- Samples
- docosanoic acid methyl , ethyl icosapentate ,
- Applications
- Analysis of ethyl icosapentate using Shinwasorb
- Column
- DEGS 12.5% Shinwasorb-S 60/80
- Column Size
- 1.8 m x 4.0 mm I.D. Glass
- Column temp.
- 210℃
- Carrier gas
- 47 mL/min N2
- Injection port temp.
- 230℃
- Detector temp.
- 200℃
- Detector
- FID
- Injection volume
- 3.0 μL
View detail
GC
- Samples
- Petroleum ether , Methyl oleate
- Applications
- Analysis of oleic acid using Shinwasorb
- Column
- Shinchrom E71 10% Shinwasorb-U 80/100
- Column Size
- 2.1m×3.2mm
- Column temp.
- 210°C
- Carrier gas
- N2,21 ml/min
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- FID
- Injection volume
- 0.2 μL
View detail
GC
- Samples
- Ethyl acetate , Caffeine , o-Toluene sulfonamide
- Applications
- Analysis of saccharin using Shinwasorb
- Column
- DEGS 1.5% Shinwasorb-S 60/80
- Column Size
- 1.0 m x 3.0 mm I.D. Glass
- Column temp.
- 210°C
- Carrier gas
- N2,55ml/min
- Injection port temp.
- 225°C
- Detector temp.
- 250°C
- Detector
- FID
View detail
GC
- Samples
- Dichloromethane , l-menthol ,
- Applications
- Analysis of l-menthol using Shinwasorb
- Column
- PEG6000 12.5% Shinwasorb-S 60/80
- Column Size
- 2.1m x3.2 mm I.D. Glass
- Column temp.
- 140°C
- Carrier gas
- N2,33ml/min
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 5.0 μL
View detail
GC
- Samples
- Pyridine , N,N-dimethylformamide
- Applications
- Analysis of niceritrol using Shinwasorb
- Column
- PEG20M 5% Shinwasorb-S 80/100
- Column Size
- 3.1m x3.2 mm I.D. Glass
- Column temp.
- 160°C
- Carrier gas
- N2, 55ml/min
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Isopropyl iodide , Methylcyclohexane , o-xylene
- Applications
- Analysis of hydroxypropylcellulose (JP)
- Column
- ULBON HR-1
- Column Size
- 0.53 mm I.D. x 30 m df = 3.0 µm
- Column temp.
- 40℃ (3 min)~10℃/min~100℃~50℃/min~250℃ (3 min)
- Carrier gas
- 52 cm/sec He
- Injection port temp.
- 180°C
- Detector temp.
- 280°C
- Detector
- FID
- Injection volume
- 2.0 μL Split rate: 1:50
View detail
GC
- Samples
- Ethylene glycol , Diethylene glycol
- Applications
- Analysis of macrogol 400 using Shinwasorb
- Column
- Sorbitol 3% Shinwasorb-S 80/100
- Column Size
- 1.6 m x 3.2 mm I.D. Glass
- Column temp.
- 160℃
- Carrier gas
- 47 mL/min N2
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Cyclohexane , N,N-dimethylaniline , Naphthalene ,
- Applications
- Analysis of ampicillin hydrate using Shinwasorb
- Column
- Silicone OV-17 1.5% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 2.6 mm I.D. Glass
- Column temp.
- 105℃
- Carrier gas
- 20 mL/min He(adjust so that the retention time of N,N-dimethylaniline is about 5 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Cyclohexane , Ethyl acetate , 2-propanol ,
- Applications
- Analysis of lenampicillin hydrochloride using Shinwasorb
- Column
- Quadrol 5% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 100℃
- Carrier gas
- 70 mL/min N₂ (Adjust so that the retention time of cyclohexane is about 1 minute.)
- Injection port temp.
- 160°C
- Detector temp.
- 160°C
- Detector
- FID
- Injection volume
- 4.0 μL
View detail
GC
- Samples
- Enflurane , 2-propanol ,
- Applications
- Analysis of enflurane using Shinwasorb
- Column
- DEGS 10% Shinwasorb-S 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 80℃
- Carrier gas
- 32 mL/min He (Adjust so that the retention time of enflurane is about 3 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 5.0 μL
View detail
GC
- Samples
- Isoflurane , Ethyl acetate
- Applications
- Analysis of isoflurane using Shinwasorb
- Column
- Igepal CO-880+Ucon LB-550X 5+7.5% Shinwasorb-S 100/120
- Column Size
- 3.5 m x 3.0 mm I.D. Stainless steel
- Column temp.
- 80℃
- Carrier gas
- 37 mL/min N2 (Adjust so that the retention time of isoflurane is about 7 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- water, acetonitrile in methanol
- Applications
- Analysis of panipenem using Sunpak-A ~Water~
- Column
- Sunpak-A 80/100
- Column Size
- 2.1m x 3.2 mm I.D. Glass
- Column temp.
- 125℃
- Carrier gas
- 29 mL/min He (Adjust so that the retention time of acetonitrile is about 8 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Cyclohexane , Dicyclohexyl phthalate , Etofenprox
- Applications
- Analysis of etofenprox using Shinwasorb
- Column
- Silicone OV-225 2.5% Shinwasorb-U 60/80
- Column Size
- 1.1m x 3.2 mm I.D. Glass
- Column temp.
- 240℃
- Carrier gas
- 37 mL/min N₂ (Adjust so that the retention time of dicyclohexyl phthalate is about 8 minutes.)
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- FID
- Injection volume
- 3.0 μL
View detail
GC
- Samples
- o-Dichlorobenzene, m-Bromochlorobenzene in acetone
- Applications
- Analysis of o-dichlorobenzene using Shinwasorb
- Column
- PEG20M-TPA 2.5% Shinwasorb-U 60/80
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 115℃
- Carrier gas
- 39 mL/min N₂ (Adjust so that the retention time of o-dichlorobenzene is about 11 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Acetone , cis-Allethrin , trans-Allethrin
- Applications
- Analysis of allethrin using Shinwasorb Part 2 ~Isomer ratio~
- Column
- Silicone DC QF-1 2.5% Shinwasorb-U 80/100
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 165℃
- Carrier gas
- 45 mL/min N₂ (Adjust so that the retention time of trans-allethrin is about 40 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Acetone , Allethrin , Di(2-ethylhexyl) phthalate
- Applications
- Analysis of allethrin using Shinwasorb Part 3
- Column
- Diethyleneglycol Succinate (DEGS) 2.5% Shinwasorb-U 80/100
- Column Size
- 1.1 m x 3.2 mm I.D. Glass
- Column temp.
- 200℃
- Carrier gas
- 36 mL/min N₂ (Adjust so that the retention time of allethrin is about 8 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Acetone , Dichlorvos , 1-chloronaphthalene
- Applications
- Analysis of dichlorvos using Shinwasorb
- Column
- Silicone DC-550 10% Shinwasorb-S 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 180℃
- Carrier gas
- 40 mL/min N₂ (Adjust so that the retention time of dichlorvos is about 6 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Chloroform , Fenitrothion , Fluoranthene
- Applications
- Analysis of fenitrothion using Shinwasorb
- Column
- Polyphenyl Ether (5 rings) 1.5% Shinwasorb-S 100/120
- Column Size
- 1.1 m x 3.2 mm I.D. Glass
- Column temp.
- 195℃
- Carrier gas
- 55 mL/min N₂ (Adjust so that the retention time of fenitrothion is about 16 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Dichlorvos , Tributyl phosphate
- Applications
- Analysis of dichlorvos using Shinwasorb -2-
- Column
- Silicone OV-225 1% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 170℃
- Carrier gas
- 50 mL/min N₂(Adjust so that the retention time of tributyl phosphate is about 5 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FPD
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Acetone , Allethrin , Cinerin I , Jasmolin I , Pyrethrin I , Cinerin II , Jasmolin II , Pyrethrin II
- Applications
- Analysis of pyrethrum extract using Shinwasorb
- Column
- Silicone OV-17 1% Shinwasorb-S 80/100
- Column Size
- 1.1 m x 3.2 mm I.D. Glass
- Column temp.
- 205℃
- Carrier gas
- 35 mL/min N₂(Adjust so that the retention time of Allethrin is about 3 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FPD
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Dichlorvos, Diphenyl in Acetone
- Applications
- Analysis of dichlorvos resin strip using Shinwasorb
- Column
- Silicone OV-11 10% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 170℃
- Carrier gas
- 35 mL/min N₂(Adjust so that the retention time of dichlorvos is about 8 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 3.0 μL
View detail
GC
- Samples
- Diazinon, Di-n-butyl phthalate in Acetone
- Applications
- Analysis of diazinon using Shinwasorb
- Column
- Silicone OV-11 10% Shinwasorb-U 60/80
- Column Size
- 1.6 m x 3.2 mm I.D. Glass
- Column temp.
- 200℃
- Carrier gas
- 25 mL/min N₂(Adjust so that the retention time of diazinon is about 7 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 3.0 μL
View detail
GC
- Samples
- Anhydrous caffeine, Fenitrothion in Acetone
- Applications
- Analysis of Fenitrothion Emulsifiable Concentrate using Shinwasorb
- Column
- Silicone OV-210 3% Shinwasorb-S 80/100
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 175℃
- Carrier gas
- 51 mL/min N₂(Adjust so that the retention time of Anhydrous caffeine is about 10 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Anhydrous caffeine, Fenitrothion in Acetone
- Applications
- Analysis of Fenitrothion Microcapsule using Shinwasorb
- Column
- Silicone OV-210 1.5% Shinwasorb-U 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 165℃
- Carrier gas
- 50 mL/min N₂(Adjust so that the retention time of diazinon is about 17 minutes.)
- Injection port temp.
- 200°C
- Detector temp.
- 200°C
- Detector
- FID
- Injection volume
- 2.0 μL
View detail
GC
- Samples
- Phthalthrin in Acetone
- Applications
- Analysis of phthalthrin using Shinwasorb ~Isomer ratio phthalthrin~
- Column
- Silicone DC QF-1 2.5% Shinwasorb-S 80/100
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 200℃
- Carrier gas
- 40 mL/min N₂( Adjusted so that the retention time of 3.Phthalthrin is about 40 minutes.)
- Injection port temp.
- 230°C
- Detector temp.
- 230°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Organic solvents
- Applications
- Analysis of organic solvents using Sunpak-A -1-
- Column
- Sunpak-A 50/80
- Column Size
- 2.0 m x 3.0 mm I.D. Glass
- Column temp.
- 150℃ ~ 220℃ (3 min hold) program rate 4℃/min
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Organic solvents
- Applications
- Analysis of organic solvents using Sunpak-A -2-
- Column
- Sunpak-A 50/80
- Column Size
- 2.0 m x 3.0 mm I.D. Glass
- Column temp.
- 150℃ ~ 220℃ (3 min hold) program rate 4℃/min
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Acetic acid , Propionic acid , iso-butyric acid , n-butyric acid , iso-valeric acid , n-valeric avid , iso-caproic acid , n-caproic acid
- Applications
- Lower free fatty acid in water
- Column
- Sunpak-H 60/80
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 175℃
- Carrier gas
- 50 mL/min N₂
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- HCl , SO2 , Cl2 , CHCl3 , SO2Ci2 , CCl4 ,
- Applications
- Analysis of sulfuryl chloride
- Column
- TAKU-1 20% Shimalite-F 40/80
- Column Size
- 5.1 m × 3.2 mm glass
- Column temp.
- 70°C
- Carrier gas
- He, 40 ml/min
- Injection port temp.
- 150°C
- Detector temp.
- 150°C
- Detector
- TCD
- Injection volume
- 1.5 μL
View detail
GC
- Samples
- Air , HCl , Water
- Applications
- Analysis of Hydrogen chloride
- Column
- SF-96 15% Shimalite-F 20/80
- Column Size
- 3.1 m × 3.2 mm glass
- Column temp.
- 60°C
- Carrier gas
- He, 30 ml/min
- Injection port temp.
- 190°C
- Detector temp.
- 190°C
- Detector
- TCD
- Injection volume
- 1.0 ml
View detail
GC
- Samples
- Diethyl ether , n-Hexane , Methanol , Methyl acetate , 2-Propanol , Ethyl acetate , Tetrahydrofuran , 2-Butanol , iso-Butanol , Toluene , n-Butyl acetate , Methyl n-butyl ketone , iso-Amyl alcohol , Ethylbenzene , m-Xylene , p-Xylene , o-Xylene , Styrene monomer ,
- Applications
- Measurement of organic solvents using SBS-120
- Column
- SBS-120 12% Shincarbon-A2 80/100
- Column Size
- 3.1 m x 3.2 mm I.D. Glass
- Column temp.
- 90℃
- Carrier gas
- 40 mL/min N₂
- Injection port temp.
- 230℃
- Detector temp.
- 230℃
- Detector
- FID
- Injection volume
- 1.0 μL
View detail
GC
- Samples
- Ammonia and Mono, Di, Tri-Methylamine in Water ,
- Applications
- Ammonia and Mono, Di, Tri-Methylamine in Water
- Column
- Thermon-3000 + KOH 2+2% Sunpak-N 60/100 mesh
- Column Size
- 2.1 m x 3.2 mm I.D. Glass
- Column temp.
- 120℃
- Carrier gas
- 50 mL/min He
- Injection port temp.
- 250°C
- Detector temp.
- 250°C
- Detector
- TCD
- Injection volume
- 1.0 μL
View detail
LC
- Samples
- Ethiazide
- Applications
- Ethiazide
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 92.5/7.5
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Terbutaline
- Applications
- Terbutaline
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)/CH3CN = 99/1
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Eperisone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 0.6 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Clorprenaline
- Applications
- Clorprenaline
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 94/6
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Chlormezanone
- Applications
- Chlormezanone
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 93/7
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Alimemazine
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/CH3CN = 70/30
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Thioridazine
- Applications
- Thioridazine
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 75/25
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Methylphenidate
- Applications
- The central neuron stimulant
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)/CH3CN = 90/10
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Trimipramine
- Applications
- Trimipramine
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 75/25
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Flavanone
- Applications
- Flavanone
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Hexobarbital
- Applications
- Hexobarbital
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 83/17
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Benzoin
- Applications
- Benzoin
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 88/12
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Chlorpheniramine maleate
- Applications
- Chlorpheniramine maleate
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 83/17
- Frow rate
- 1.0 mL/min
- Column temp.
- 15°C
View detail
LC
- Samples
- Mephobarbital
- Applications
- Mephobarbital
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 0.6 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- PTH-valine
- Applications
- PTH-valine
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3OH = X/Y
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- 1,2-Diphenylethylamine
- Applications
- 1,2-Diphenylethylamine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.5)
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Oxprenolol
- Applications
- Oxprenolol
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)/CH3CN = 100/10
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bunitrolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)/C2H5OH = 100/3
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Arotinolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)/CH3CN = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Pindolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.5)/C2H5OH = 100/30
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Propranolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.8)/CH3CN = 100/30
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bay K 8644
- Applications
- Calcium rivalry medicine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Verapamil
- Applications
- Calcium rivalry medicine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Prenylamine
- Applications
- Calcium rivalry medicine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/CH3CN = 100/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Clorprenaline
- Applications
- Bronchodilator agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.5)/C2H5OH = 100/3
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bupivacaine
- Applications
- The local anesthetic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.5)/CH3CN = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Chlormezanone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Tolperisone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.5)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ethiazide
- Applications
- Antihypertensive diuretic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Flurbiprofen
- Applications
- Flurbiprofen
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ibuprofen
- Applications
- Ibuprofen
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ketoprofen
- Applications
- Antiinflammatory agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Pranoprofen
- Applications
- Antiinflammatory agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 100/8
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Zaltoprofen
- Applications
- Antiinflammatory agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 87/13
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Mepenzolate bromide
- Applications
- Anticholinergic agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Thioridazine hydrochloride
- Applications
- Antipsychotic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 77/23
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Mephobarbital
- Applications
- Antiepileptic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Acetylpheneturide
- Applications
- Antiepileptic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/7.5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Biperiden
- Applications
- Antiparkinsonic agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Profenamine
- Applications
- Antiparkinsonic agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Trihexyphenidyl
- Applications
- Antiparkinsonic agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Alimemazine
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Chlorpheniramine
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/CH3CN = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Dimethindene maleate
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 100/9
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Homochlorcyclizine
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/20
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Promethazine
- Applications
- Antihistaminic drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 3.0)/CH3CN = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Hydroxyzine
- Applications
- Antianxiety agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Disopyramide phosphate
- Applications
- Disopyramide phosphate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/C2H5OH = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Glutethimide
- Applications
- Hypnotic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Hexobarbital
- Applications
- Hypnotic
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 6.0)/C2H5OH = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Proglumide
- Applications
- Peptic ulcer agent
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/C2H5OH = 100/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Thyroxine
- Applications
- Thyroxine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/CH3CN = 100/20
- Frow rate
- 1.2 mL/min
- Column temp.
- 15°C
View detail
LC
- Samples
- Benproperine
- Applications
- Antitussive drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 100/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Meclizine
- Applications
- Meclizine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/C2H5OH = 100/35
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Flavanone
- Applications
- Flavonoid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/CH3CN = 100/30
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Benzoin
- Applications
- Benzoin
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/C2H5OH = 100/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Chlorphenesin
- Applications
- Muscle relaxant
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 5.5)
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Eperisone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 5.5)/C2H5OH = 100/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Cloperastine
- Applications
- Antitussive drug
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 (pH 4.6)/C2H5OH = 100/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Atenolol
- Applications
- Atenolol
- Column
- ULTRON ES-PEPSIN
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM KH2PO4 + 20mM K2HPO4 (pH 6.0)/C2H5OH = 99/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Alprenolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-PEPSIN
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.9 µL (0.6 mg/mL)
View detail
LC
- Samples
- Bufetolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-PEPSIN
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL (ca. 1 mg/mL)
View detail
LC
- Samples
- Terbutaline
- Applications
- Bronchodilator agent
- Column
- ULTRON ES-PEPSIN
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 6.0)
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 5 µL (ca. 0.25 mg/mL)
View detail
LC
- Samples
- Salbutamol
- Applications
- Bronchodilator agent
- Column
- ULTRON ES-PEPSIN
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 5.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL (0.25 mg/mL)
View detail
LC
- Samples
- 1,1'-Bi-2-naphthol
- Applications
- 1,1'-Bi-2-naphthol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- n-Hexane/Dichloromethane/CH3OH = 75/25/5
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- α-Phenylethylamine , (S)-(-)-α-Methylbenzylamine
- Applications
- α-Phenylethylamine
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 95/5
- Frow rate
- 0.6 mL/min
- Column temp.
- 15°C
View detail
LC
- Samples
- α-Phenylethylalchol
- Applications
- α-Phenylethylalchol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 0.6 mL/min
- Column temp.
- 15°C
View detail
LC
- Samples
- Propranolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 65/35
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 20 µL
View detail
LC
- Samples
- Acetylpheneturide
- Applications
- Antiepileptic
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 76/24
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Atenolol
- Applications
- Atenolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 90/10
- Frow rate
- 0.3 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Alprenolol
- Applications
- Alprenolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Arotinolol
- Applications
- Arotinolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 75/25
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bupivacaine
- Applications
- The local anesthetic
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Eperisone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 70/30
- Frow rate
- 1.2 mL/min
- Column temp.
- 9°C
View detail
LC
- Samples
- Chlormezanone
- Applications
- Muscle relaxant
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 70/30
- Frow rate
- 0.6 mL/min
- Column temp.
- 9°C
View detail
LC
- Samples
- Chlorphenesin
- Applications
- Muscle relaxant
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 70/30
- Frow rate
- 0.6 mL/min
- Column temp.
- 9°C
View detail
LC
- Samples
- Pindolol
- Applications
- Pindolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bunitrolol
- Applications
- β-Blocking agent
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 70/30
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Propranolol
- Applications
- Propranolol
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 60/40
- Frow rate
- 1.2 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Sucrose , Lactose , Glucose , Galactose , Fructose
- Applications
- Yoghurt drink
- Column
- ULTRON PS-80C
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 0.5 mL/min
- Column temp.
- 80°C
- Pressure
- 2.0 MPa
- Injection volume
- 10 µL
View detail
LC
- Samples
- Formaldehyde, Acetaldehyde, Ethanol
- Applications
- Formaldehyde, Acetaldehyde, Ethanol
- Column
- ULTRON PS-80H
- Column Size
- 50 mm L × 8.0 mm I.D. + 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4aq. (pH 2.1)
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.5 MPa
View detail
LC
- Samples
- Ethylene glycol , Diethylene glycol , Methanol , Ethanol , Isopropyl alcohol
- Applications
- Alcohols
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.5 MPa
- Injection volume
- 6.0 µL (10 mg/mL)
View detail
LC
- Samples
- Glucuronic acid , N-Acetylglucosamine , N-Acetylgalactosamine
- Applications
- Uronic acid, Acetylation amino sugar
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4aq. (pH 2.1)
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.5 MPa
View detail
LC
- Samples
- Citric acid , Tartaric acid , Malic acid , Malonic acid , Succinic acid , Glycolic acid , Formic acid , Lactic acid , Acetic acid , Fumaric acid , Adipic acid , Pyroglutamic acid , Propionic acid , Acrylic acid , Pivalic acid , Methacrylic acid , Crotonic acid
- Applications
- Elution position of the aliphatic organic acid
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D. + 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4aq. (pH 2.1)
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
View detail
LC
- Samples
- Citric acid , Tartaric acid , Malic acid , Succinic acid , Lactic acid , Acetic acid , Pyroglutamic acid
- Applications
- Analysis of the soy sauce
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4aq. (pH 2.1)
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
View detail
LC
- Samples
- Citric acid , Tartaric acid , Malonic acid , Succinic acid , Lactic acid , Acetic acid , Gallic acid , Propionic acid , Phthalic acid , Phenoxyacetic acid , m-Hydroxybenzoic acid , p-Hydroxybenzoic acid , Vanilic acid , Caffeic acid , Benzoic acid , o-Hydroxybenzoic acid
- Applications
- Elution position of the aromatic organic acid
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4aq. (pH 2.1)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
View detail
LC
- Samples
- Stachyose , Raffinose , Glucose
- Applications
- Separation of stachyose and raffinose
- Column
- ULTRON PS-80N
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.5 MPa
- Injection volume
- 10 µL (2 mg/mL)
View detail
LC
- Samples
- Maltotriose , Maltose , Glucose , Glycerol , Ethanol
- Applications
- Sake
- Column
- ULTRON PS-80N
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.2 MPa
- Injection volume
- 10 µL (undiluted solution)
View detail
LC
- Samples
- Maltotriose , Maltose , Glucose
- Applications
- Starch syrup
- Column
- ULTRON PS-80N
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Pressure
- 2.2 MPa
- Injection volume
- 5 µL (25 mg/mL)
View detail
LC
- Samples
- Sucrose , Lactose , Glucose , Xylose , Galactose , Fructose , Inositol
- Applications
- Sugar and alditol
- Column
- ULTRON PS-80P
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- H2O
- Frow rate
- 1.0 mL/min
- Column temp.
- 80°C
- Pressure
- 2.0 MPa
View detail
LC
- Samples
- Nicotinamide adenine dinucleotide oxidized , Nicotinamide adenine dinucleotide reduced
- Applications
- NAD, NADH
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM NH4H2PO4 (pH 2.6)
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Aspartic acid , Glutamic acid , Serine , Glycine , Histidine , Arginine , Threonine , Alanine , Proline , Tyrosine , Valine , Methionine , Cysteine-cysteine , Isoleucine , Leucine , Phenylalanine , Lysine
- Applications
- Analysis of the PTC amino acid
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- A: CH3COONa (pH 6.5)/CH3CN = 93/7, B: CH3CN/H2O = 4/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Asulam
- Applications
- Asulam
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 50 mM Phosphoric acid buffer (pH 3.3)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Iprodione, Bensulide
- Applications
- Iprodione, Bensulide
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O = 60/40
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Hippuric acid , o-Methyl hippuric acid , p-Methyl hippuric acid , m-Methyl hippuric acid
- Applications
- Hippuric acid
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM Phosphoric acid buffer (pH 2.5) + 10 mM β-Cyclodextrin/CH3CN = 8/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 50°C
View detail
LC
- Samples
- Arbutin , Hydroquinone , Gallic acid
- Applications
- Arbutin in the Bearberry Leaf end
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100 mM Phosphoric acid buffer (pH 2.1)/CH3OH = 40/1
- Frow rate
- 0.9 mL/min
- Column temp.
- 35°C
View detail
LC
- Samples
- Berberine
- Applications
- Berberine in the Coptis end
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- The result of dissolving potassium dihydrogenphosphate 3.4 g and sodium lauryl sulfate 1.7 g at water 1 L/CH3CN = 1/1
- Frow rate
- 0.5 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Oxine-copper
- Applications
- Oxine-copper
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 50 mM Phosphoric acid buffer (pH 2.2)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Cytosine , Uracil , Guanine , Adenine , Cytidine , Uridine , Thymine , Adenosine , Guanosine , Thymidine
- Applications
- Nucleic acid base, Nucleoside
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 0.1 M Phosphoric acid buffer (pH 2.1) + 0.2 M NaClO4
- Frow rate
- 1.0 mL/min
- Column temp.
- 50°C
View detail
LC
- Samples
- Methylephedrine hydrochloride , Noscapine , Thiamine , Dextromethorphan , Carbinoxamine maleate
- Applications
- The component of the cold remedy (1)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O/H3PO4 = 510/490/1 + 0.5% Sodium dodecyl sulfate
- Frow rate
- 1.0 mL/min
- Column temp.
- 50°C
View detail
LC
- Samples
- Acetaminophen , Caffeine , Riboflavin , Phenol , Potassium guaiacol-4-sulfonate
- Applications
- The component of the cold remedy (2)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- H2O/CH3CN/50 mM Tetrabutylammonium = 15/2/1 (Adjusted to pH 6 with Phosphoric acid)
- Frow rate
- 1.0 mL/min
- Column temp.
- 50°C
View detail
LC
- Samples
- Glycyrrhetic acid , Propyl paraben
- Applications
- Glycyrrhizin in the licorice end
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 15 times dilution Acetic acid aqueous solution/CH3CN = 3/2
- Frow rate
- 0.7 mL/min
- Column temp.
- ambient
View detail
LC
- Samples
- Ethosuximide , Primidone , Phenobarbital , Phenytoin , Carbamazepin
- Applications
- Anticonvulsant analysis
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100 mM Phosphoric acid buffer(pH 4.0)/CH3OH/CH3CN = 4/2/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Methyl p-hydroxybenzoate , Ethyl p-hydroxybenzoate , Propyl p-hydroxybenzoate , Butyl p-hydroxybenzoate
- Applications
- The elution behavior of the acid sample
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O = 50/50
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Methyl salicylate , Ethyl salicylate , Propyl salicylate , Butyl salicylate
- Applications
- The elution behavior of the acid sample
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O = 70/30
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Benzoic acid , p-Toluic acid , p-Ethylbenzoic acid
- Applications
- The elution behavior of the acid sample
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/0.1% Phosphoric acid = 50/50
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Paeoniflorin
- Applications
- Paeoniflorin in the peony end
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM CH3COONa (pH 4.8)/CH3CN = 5/1
- Frow rate
- 0.5 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Salicylic acid , Diphenhydramine , Methyl salicylate , α-Camphor , Thymol
- Applications
- The component of the anti-inflammatory agent
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM Phosphoric acid buffer(pH 2.6) + 20 mM Heptane sodium sulphonate/CH3OH/CH3CN = 3/2/2
- Frow rate
- 1.0 mL/min
- Column temp.
- 45°C
View detail
LC
- Samples
- Vitamin A , Vitamin D2 , Vitamin D3 , Vitamin E , Tocopherol acetate
- Applications
- Fat-soluble vitamin
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Hypoxanthine , Inosine 5'-monophosphate , Adenosine 5'-diphosphate , Adenosine 5'-monophosphate , Inosine , Adenosine 5'-triphosphate
- Applications
- The freshness K value
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 24 mM 2-Diethylaminoethanol + 16 mM Citric acid
- Frow rate
- 2.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Nicotinic acid , Nicotinamide , Pantothenic acid , Pyridoxine , Riboflavin phosphate , Thiamine , Caffeine , Folic acid , Biotin , Riboflavin
- Applications
- The water-soluble vitamin (1)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100 mM Phosphoric acid buffer(pH 2.1) + 0.8 mM Octane sodium sulphonate/CH3CN = 9/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Pyridoxal , Pyridoxine , Pyridoxamine
- Applications
- The water-soluble vitamin (2)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100 mM Phosphoric acid buffer(pH 2.1) + 50 mM Hexane sodium sulphonate/CH3CN = 9/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 45°C
View detail
LC
- Samples
- Cholic acid , Glycocholic acid , Taurocholic acid , Chenodeoxycholic acid , Glycochenodeoxycholic acid , Deoxycholic acid , Taurochenodeoxycholic acid , Taurodeoxycholic acid
- Applications
- Bile acid
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/30 mM (NH4)2HPO4(Ajusted to pH 7.2 with NH4H2PO4), A: 10/90, B: 50/50
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Thiuram
- Applications
- Thiuram
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O = 50/50
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Cytidine 5'-monophosphate , Uridine 5'-monophosphate , Guanosine 5'-monophosphate , Adenosine 5'-triphosphate , Cytidine , Uridine , Adenosine 5'-monophosphate , Inosine , Guanosine
- Applications
- Nucleoside, Nucleotide
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 0.1 M KH2PO4(pH 5.8) + 0.2 mM Na2SO4
- Frow rate
- 1.0 mL/min
- Column temp.
- ambient
- Pressure
- UV-254 nm
View detail
LC
- Samples
- Methyl paraben , Ethyl paraben , Isopropyl paraben , Propyl paraben , Isobutyl paraben , Butyl paraben , Each 100ppm containing
- Applications
- Paraben (Added to commercial soy sauce)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM Phosphoric acid buffer(pH 2.6)/CH3OH = 1/1
- Frow rate
- 1.5 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Prostaglandin , 2,4,5-Trihydroxybutyrophenone , Nordihydroguaiaretic acid , Butyl hydroxy anisole , Octyl gallate , 2,6-Di-tert-butyl-4-hydroxymethylphenol , Lauryl gallate , 2,6-Di-t-butyl 4-methylphenol
- Applications
- The phenolic system antioxidant (Added to commercial edible oil)
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- A: 10 mM Phosphoric acid buffer(pH 2.6), B: CH3CN
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Tartaric acid , Malic acid , Malonic acid , Acetic acid , Citric acid , Succinic acid , Malic acid degradate , Propionic acid
- Applications
- Organic acids
- Column
- STR ODS-II
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 5 mM NH4H2PO4(pH 2.4)
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- p-Hydroxybenzoic acid , m-Hydroxybenzoic acid , Phenol , Acetylsalicylic acid , Benzoic acid , Salicylic acid
- Applications
- Acidic compounds
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM (NH4)3PO4(pH 2.5)/CH3CN = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Pyridine , Phenol
- Applications
- Pyridine, Phenol test
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/H2O = 30/70
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Inosine 5'-monophosphate , Pyroglutamic acid
- Applications
- 5'-IMP(Inosinic acid), Pyroglutamic acid
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM Phosphoric acid buffer(pH 6.7)/CH3OH = 99/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- β-Carotene
- Applications
- β-Carotene
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- CH3OH/Tetrahydrofuran = 9/1 + 0.05% BHT
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Glycyrrhizin
- Applications
- Glycyrrhizin
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 7/3
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Glycyrrhetic acid
- Applications
- Glycyrrhetic acid
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 1/4
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Oxalic acid , Nitric acid
- Applications
- Oxalic acid (COO-)2, Nitric acid(NO3-)
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 2.2)/CH3OH = 91/9 + 2 mM Tetrabutylammonium bromide
- Frow rate
- 1.0 mL/min
- Column temp.
- ambient
View detail
LC
- Samples
- Nicotinic acid , Nicotinic acid amide , Calcium pantothenate , Pyridoxine hydrochloride , Riboflavin phosphate , Thiamine , Folic acid , Biotin , Riboflavin
- Applications
- The water-soluble vitamin
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM H3PO4/5 mM Sodium 1-hexanesulfonate = 91/9
- Frow rate
- 1.0 mL/min
- Column temp.
- 45°C
View detail
LC
- Samples
- Predonisone , Cortisone , Hydrocortisone , Cortisone acetate , Hydrocortisone acetate
- Applications
- Separation of the steroid
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- H2O/CH3OH/THF = 70/10/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- Uric acid, Hypoxanthine, Xanthine, Inosine
- Applications
- Uric acid, Hypoxanthine, Xanthine, Inosine
- Column
- ULTRON VX-ODS
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM Phosphoric acid buffer(pH 6.7)/CH3OH = 99/1
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Estrone , Estradiol , Estriol
- Applications
- Female sex hormone
- Column
- ULTRON VX-SIL
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- n-Hexane/C2H5OH = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- ambient
View detail
LC
- Samples
- Bepotastine besilate
- Applications
- Bepotastine besilate
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 75/25
- Frow rate
- 0.7 mL/min
- Column temp.
- 40°C
View detail
LC
- Samples
- 2-(4-Hydroxyphenoxy)propionic acid
- Applications
- 2-(4-Hydroxyphenoxy)propionic acid
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- 2-(4-Hydroxyphenoxy)propionic acid
- Applications
- 2-(4-Hydroxyphenoxy)propionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Aminoglutethimide
- Applications
- Aminoglutethimide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 92/8
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Amlodipine
- Applications
- Amlodipine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Benidipine hydrochloride
- Applications
- Benidipine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bepotastine besilate
- Applications
- Bepotastine besilate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bepridil hydrochloride
- Applications
- Bepridil hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bicalutamide
- Applications
- Bicalutamide
- Column
- ULTRON ES-CD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bicalutamide
- Applications
- Bicalutamide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 87/13
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bromacil
- Applications
- Bromacil
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Brompheniramine maleate
- Applications
- Brompheniramine maleate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Candesartan cilexetil
- Applications
- Candesartan cilexetil
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4/CH3CN = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Duloxetine hydrochloride
- Applications
- Duloxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Duloxetine hydrochloride
- Applications
- Duloxetine hydrochloride
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4(pH 3.0)/CH3CN = 65/35
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- EDDP perchlorate
- Applications
- EDDP perchlorate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Omeprazole
- Applications
- Omeprazole
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 95/5
- Frow rate
- 0.9 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ornidazole
- Applications
- Ornidazole
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3OH = 95/5
- Frow rate
- 0.5 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Amlodipine
- Applications
- Amlodipine
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Atomoxetine hydrochloride
- Applications
- Atomoxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/CH3CN = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Atomoxetine hydrochloride
- Applications
- Atomoxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/CH3CN = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Azelnidipine
- Applications
- Azelnidipine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/C2H5OH = 72/28
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Bupropion hydrochloride
- Applications
- Bupropion hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/C2H5OH = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Candesartan cilexetil
- Applications
- Candesartan cilexetil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4/CH3CN = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Carvedilol
- Applications
- Carvedilol
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 7.0)/CH3OH = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Carvedilol
- Applications
- Carvedilol
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 7.0)/CH3OH = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Cetirizine hydrochloride
- Applications
- Cetirizine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Cetirizine hydrochloride
- Applications
- Cetirizine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Doxylamine succinate
- Applications
- Doxylamine succinate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 6.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Duloxetine hydrochloride
- Applications
- Duloxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3CN = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Escitalopram oxalate
- Applications
- Escitalopram oxalate
- Column
- ULTRON ES-OVM , ULTRON ES-OVM-E
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 50 mM KH2PO4 + 0.2 N NaOH(pH 7.0)/CH3CN = 85/15
- Frow rate
- 0.6 mL/min
- Column temp.
- 30°C
View detail
LC
- Samples
- Formoterol fumarate
- Applications
- Formoterol fumarate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 7.0)/C2H5OH = 94/6
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Formoterol fumarate
- Applications
- Formoterol fumarate
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4(pH 7.0)/C2H5OH = 94/6
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ibuprofen
- Applications
- Ibuprofen
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH 4.6)/CH3OH = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Ipratropium bromide
- Applications
- Ipratropium bromide
- Column
- ULTRON ES-PhCD
- Column Size
- 150 mm L × 6.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4(pH4.6)/CH3CN = 65/35
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
View detail
LC
- Samples
- Acetyl-L-carnitine, L-Carnitine
- Applications
- Acetyl-L-carnitine, L-Carnitine
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 20 mM CH3CO2NH4(pH 4.7)/CH3CN = 20/80
- Frow rate
- 0.4 mL/min
- Column temp.
- 30°C
- Injection volume
- 0.1 µL
View detail
LC
- Samples
- Nicotinamide , Pyridoxine , Isoascorbic acid , Riboflavin , Nicotinic acid , Ascorbic acid , Biotin , Pantothenic acid , Folic acid , Cyanocobalamin , Thiamine
- Applications
- Water-soluble vitamins
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: 20 mM CH3CO2NH4(pH 6.8)/CH3CN = 10/90, B: 20 mM CH3CO2NH4(pH 6.8)/CH3CN = 70/30
- Frow rate
- 0.25 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- Allantoin , Xanthine , Hypoxanthine , Uric acid
- Applications
- Uric acid metabolites
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10 mM CH3CO2NH4(pH 4.7)/CH3CN = 10/90
- Frow rate
- 0.35 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- Ethyl α-D-glucoside , Fructose , Glucose , Sucrose , Maltose , Lactose
- Applications
- Sugars in food
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10 mM CH3CO2NH4(pH 6.8)/CH3CN = 12/88
- Frow rate
- 0.3 mL/min
- Column temp.
- 40°C
- Injection volume
- 1.0 µL (each 1 mg/mL)
View detail
LC
- Samples
- Theophylline , 1.7-Dimethylxanthine , Theobromine
- Applications
- Xanthines
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10 mM CH3CO2NH4(pH 6.8)/CH3CN = 13/87
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- Urea , Xanthine , Lactic acid , Creatinine , Uric acid
- Applications
- Sweat Composition
- Column
- ULTRON AF-HILIC-CD (PLSS)
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10 mM HCO2NH4(pH 3.0)/CH3CN = 10/90
- Frow rate
- 0.30 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- Caffeine , Theobromine , Purine , Xanthine , Hypoxanthine , Adenine , Guanine , Uric acid , Isoguanine
- Applications
- Purine and purine bases
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 15 mM CH3CO2NH4(pH 4.7)/CH3CN = 10/90
- Frow rate
- 0.35 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- (CYS)2 , LYS , ARG , HIS , ASP , GLU , GLN , ASN , GLY , SER , ALA , THR , PRO , TYR , VAL , PHE , MET , TRP , LEU+ILE
- Applications
- Analysis of underivatized amino acids by LC/MS/MS
- Column
- ULTRON AF-HILIC-CD (PLSS)
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: 100 mM HCO2NH4(pH 3.0)/CH3CN = 10/90, B: 100 mM HCO2NH4(pH 3.0)/CH3CN = 70/30
- Frow rate
- 0.36 mL/min
- Column temp.
- 40°C
- Injection volume
- 1.0 µL (5.0 µg/mL)
View detail
LC
- Samples
- Fucose , Xylose , GalNAc , Mannose , Glucose , GluNAc , Galactose , Neu5Ac , Glucuronic acid
- Applications
- Glycan-constituting monosaccharides
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: 200 mM CH3CO2NH4(pH 6.8)/CH3CN = 10/90 (for peak 1 to 7), B: 200 mM CH3CO2NH4(pH 6.8)/CH3CN = 18/82 (for peak 8 and 9)
- Frow rate
- 0.26 mL/min
- Column temp.
- 45°C
- Injection volume
- 1.0 µL
View detail
LC
- Samples
- Cyanuric acid , Ammelide , Melamine , Ammeline
- Applications
- Melamine-related compounds
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 2.0 mm I.D.
- Mobile phase
- 20 mM HCO2NH4(pH 6.8)/CH3CN = 18/82
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 0.8 µL
View detail
LC
- Samples
- Mirabegron
- Applications
- β3 adrenergic receptor agonist
- Column
- ULTRON ES-PhCD
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- CH3CN/50mM KH2PO4(pH 4.0) = 200/750
- Frow rate
- 0.9 mL/min
- Column temp.
- 50°C
- Injection volume
- 20 µL
View detail
LC
- Samples
- Formaldehyde , Methanol , Acetone
- Applications
- Formaldehyde , Methanol , Acetone
- Column
- ULTRON PS-80H
- Column Size
- 300 mm L × 8.0 mm I.D.
- Mobile phase
- HClO4 aq
- Frow rate
- 1.0 mL/min
- Column temp.
- 60°C
- Injection volume
- 10 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Toluene , Uridine , 2'-Deoxyuridine , 5-Methyluridine , Adenosine , Vidarabine , 2'-Deoxyguanosine , 3'-Deoxyguanosine , 4-Nitrophenyl-α-glucopyranoside , 4-Nitrophenyl-β-glucopyranoside , Theophylline , Theobromine ,
- Applications
- Analysis of polar compounds
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM CH3CO2NH4 (pH4.7) /CH3CN = 10/90
- Frow rate
- 0.50 mL/min
- Column temp.
- 30°C
- Injection volume
- 4.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Toluene , Uridine , 2'-Deoxyuridine , 5-Methyluridine , Adenosine , Vidarabine , 2'-Deoxyguanosine , 3'-Deoxyguanosine , 4-Nitrophenyl-α-glucopyranoside , 4-Nitrophenyl-β-glucopyranoside , Theophylline , Theobromine ,
- Applications
- Analysis of polar compounds
- Column
- ULTRON AF-HILIC-DA
- Column Size
- 100 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM CH3CO2NH4 (pH4.7) /CH3CN = 10/90
- Frow rate
- 0.50 mL/min
- Column temp.
- 30°C
- Injection volume
- 4.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- L-DOPA , Dopamine , Adrenaline , Noradrenaline
- Applications
- Analysis of catecholamines
- Column
- ULTRON AF-HILIC-DA
- Column Size
- 100 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM CH3CO2NH4 (pH4.7) /CH3CN = 10/90
- Frow rate
- 0.50 mL/min
- Column temp.
- 30°C
- Injection volume
- 4.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- 1-Methylpyrazole , Fomepizole , Pyrazole , 1H-1,2,3-Triazole , Pyrazoline , Imidazole ,
- Applications
- Analysis of heterocyclic compounds
- Column
- ULTRON AF-HILIC-DA
- Column Size
- 100 mm L × 4.6 mm I.D.
- Mobile phase
- 20mM HCO2NH4 (pH3.2) /CH3CN = 10/90
- Frow rate
- 0.50 mL/min
- Column temp.
- 30°C
- Injection volume
- 4.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Glucose , Maltose , Maltotriose , Maltotetraose , Maltopentaose , Maltohexaose , Maltoheptaose ,
- Applications
- Analysis of maltooligosaccharides
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 2.0 mm I.D.
- Mobile phase
- A: H2O /CH3CN = 10/90, B: H2O /CH3CN = 70/30
- Frow rate
- 0.26 mL/min: 69% A /31% B (71.4% CH3CN)
- Column temp.
- 40°C
- Injection volume
- 1.0 µL
- Diluent
- H2O
View detail
LC
- Samples
- Xylose , Fructose , Glucose , Mannitol , Xylobiose , Sucrose , Lactulose , Lactose , Trehalose , Xylotriose , 1-Kestose(GF2) , Raffinose , Nystose(GF3) ,
- Applications
- Analysis of monosaccharides, disaccharides, and oligosaccharides
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 2.0 mm I.D.
- Mobile phase
- A: H2O /CH3CN = 10/90, B: H2O /CH3CN = 70/30
- Frow rate
- 0.26 mL/min
- Column temp.
- 40°C
- Injection volume
- 1.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Xylose , Fructose , Glucose , Mannitol , Xylobiose , Sucrose , Lactulose , Lactose , Trehalose , Xylotriose , 1-Kestose(GF2) , Raffinose , Nystose(GF3) ,
- Applications
- Analysis of monosaccharides, disaccharides, and oligosaccharides
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 2.0 mm I.D.
- Mobile phase
- A: 20mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90, B: 20mM CH3CO2NH4 (pH6.8) /CH3CN = 70/30
- Frow rate
- 0.26 mL/min
- Column temp.
- 40°C
- Injection volume
- 2.5 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Erythritol , Xylitol , Fructose , Glucose , Sorbitol , Sucrose , Inositol , Maltose , Maltitol , Lactose , Lactitol
- Applications
- Analysis of saccharides and sweeteners
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: 100mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90, B: 100mM CH3CO2NH4 (pH6.8) /CH3CN = 70/30
- Frow rate
- 0.32 mL/min
- Column temp.
- 40°C
- Injection volume
- 1.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Erythritol , Psicose , Tagatose , Allose , Glucose , Sucrose
- Applications
- Analysis of rare sugar, Glucose, and Sucrose
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 100mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90
- Frow rate
- 0.36 mL/min
- Column temp.
- 40°C
- Injection volume
- 1.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Theophylline , 1-Methylxanthine , 1,3-Dimethyluric acid
- Applications
- Analysis of Theophyline and metabolites
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10mM CH3CO2NH4 (pH6.8) /CH3CN = 13/87
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
- Diluent
- Dissolved samples in 0.1% NaOH aq and add acetonitrile into ratio to 90%
View detail
LC
- Samples
- Maleic acid , Pyruvic acid , Ascorbic acid , Gluconic acid , Adipic acid , Fumaric acid , Tartaric acid , Malic acid , Citric acid
- Applications
- Analysis of organic acid
- Column
- ULTRON AF-HILIC-CD (PLSS)
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 100mM CH3CO2NH4 (pH6.8) /CH3CN = 25/75
- Frow rate
- 0.20 mL/min
- Column temp.
- 40°C
- Injection volume
- 2.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Acesulfame K , Saccharin , Caffeine , Sorbic acid , Benzoic acid , Quinine , Aspartame
- Applications
- Analysis of food additives
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 3.0 mm I.D.
- Mobile phase
- A: 20mM CH3CO2NH4 (pH4.7) /CH3CN = 10/90, B: 20mM CH3CO2NH4 (pH4.7) /CH3CN = 70/30
- Frow rate
- Refer to the picture
- Column temp.
- 30°C
- Injection volume
- 2.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Allantoin , Xanthine , Hypoxanthine , Uric acid
- Applications
- Analysis of Uric acid metabolite
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10mM CH3CO2NH4 (pH4.7) /CH3CN = 10/90
- Frow rate
- 0.35 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
- Diluent
- Dissolved samples in 0.1% NaOH aq and add acetonitrile into ratio to 50%
View detail
LC
- Samples
- Val-Tyr-Val , Leucine Enkephalin , Methionine Enkephalin , Gly-Tyr
- Applications
- Analysis of peptide standards
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: 10mM HCO2NH4 (pH3.0) /CH3CN = 10/90, B: 10mM HCO2NH4 (pH3.0) /CH3CN = 70/30
- Frow rate
- 0.26 mL/min: 67% A/ 33% B (70.0% CH3CN)
- Column temp.
- 40°C
- Injection volume
- 2.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Cyanuric acid , Ammelide , Melamine , Ammeline
- Applications
- Analysis of melamine compounds
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 100 mm L × 2.0 mm I.D.
- Mobile phase
- 20mM HCO2NH4 (pH6.8) /CH3CN = 18/82
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 2.0 µL
- Diluent
- Dissolved samples in 0.1% NaOH aq and add acetonitrile into ratio to 50%
View detail
LC
- Samples
- Caffeine , Theophylline , Theobromine , 1-Methylxanthine , Xanthine
- Applications
- Analysis of Xanthines
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 10mM CH3CO2NH4 (pH6.8) /CH3CN = 13/87
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 1.0 µL
- Diluent
- Dissolved samples in 0.1% NaOH aq and add acetonitrile into ratio to 90%
View detail
LC
- Samples
- Lenalidomide
- Applications
- Analysis of Lenalidomide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 95/5
- Frow rate
- 0.7 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Nitrendipine
- Applications
- Analysis of Nitrendipine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Sertraline hydrochloride
- Applications
- Analysis of Sertraline hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tosufloxacin tosilate hydrate
- Applications
- Analysis of Tosufloxacin tosilate hydrate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 7.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Nefopam hydrochloride
- Applications
- Analysis of Nefopam hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Tolperisone hydrochloride
- Applications
- Analysis of Tolperisone hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20mM K2HPO4 (pH 5.5)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Nisoldipine
- Applications
- Analysis of Nisoldipine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 88/12
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Rabeprazole
- Applications
- Analysis of Rabeprozole
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3OH = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Rotigotine
- Applications
- Analysis of Rotigotine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Cinacalcet hydrochloride
- Applications
- Analysis of Cinacalcet hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 93/7
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Atorvastatin calcium
- Applications
- Analysis of Atorvastatine calcium
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM K2HPO4 + H3PO4 (pH 7.5)/CH3OH = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Cisapride
- Applications
- Analysis of Cisapride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/C2H5OH = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Sitagliptin
- Applications
- Analysis of Sitagliptin
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20mM K2HPO4 (pH 6.8)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 10.0 µL
- Diluent
- water
View detail
LC
- Samples
- Lafutidine
- Applications
- Analysis of Laftidine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3OH = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Montelukast sodium
- Applications
- Analysis of Montelukast sodium
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3OH = 60/40
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Rebamipide
- Applications
- Analysis of Rebamipide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 87/13
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 1.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Efavirentz
- Applications
- Analysis of Efavirentz
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Sulfinpyrazone
- Applications
- Analysis of Sulfinpyrazone
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM CH3COONH4 (pH 6.8)/CH3CH(OH)CH3 = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Trihexyphenidyl hydrochloride
- Applications
- Analysis of Trihexyphenidyl hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Sulconazole nitrate
- Applications
- Analysis of Sulconazole nitrate
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3OH = 86/14
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tamsulosin
- Applications
- Analysis of Tamsulosin
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/C2H5OH = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- 2-(4-Hydroxyphenoxy)propionic acid
- Applications
- Analysis of 2-(4-Hydroxyphenoxy)propionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- 3,3-Dimethyl-4-phenyl-2-azetidinone
- Applications
- Analysis of 3,3-Dimethyl-4-phenyl-2-azetidinone
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Pronethalol hydrochloride
- Applications
- Analysis of Pronethalol hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- Thalidomide
- Applications
- Analysis of Thalidomide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
- Frow rate
- 0.7 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- 2-Phenoxypropionic acid
- Applications
- Analysis of 2-Phenoxypropionic acid
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/C2H5OH = 90/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- Benfluorex
- Applications
- Analysis of Benfluorex
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 88/12
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- water
View detail
LC
- Samples
- Glycopyrronium bromide
- Applications
- Analysis of Glycopyrronium bromide
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20mM K2HPO4 (pH 5.5)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
View detail
LC
- Samples
- Ropivacaine
- Applications
- Analysis of Ropivacaine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 5.0 µL
View detail
LC
- Samples
- Voriconazole , Voriconazole Related Compound B
- Applications
- Analysis of Voriconazole
- Column
- ULTRON ES-CD-2
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM CH3CO2NH4 (pH 5.0)/CH3CN = 82/18
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
- Injection volume
- 20.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Sertraline hydrochloride , Sertraline Hydrochloride Related Compound A
- Applications
- Analysis of Sertraline hydrochloride
- Column
- ULTRON ES-CD
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- 50.4mM NH4H2PO4 (pH 4.2)/CH3OH = 52/48
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
- Injection volume
- 20.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Lamivudine
- Applications
- Analysis of Lamivudine
- Column
- ULTRON ES-CD-2
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- 100mM CH3COONH4/CH3OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 10.0 µL
- Diluent
- water
View detail
LC
- Samples
- Glycopyrrolate , Glycopyrrolate erythro isomer
- Applications
- Analysis of Glycopyrrolate
- Column
- ULTRON ES-CD
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- 23.3 mM NaH2PO4(pH 6.5)/CH3OH/CH3CN = 40/50/10
- Frow rate
- 1.0 mL/min
- Column temp.
- 30°C
- Injection volume
- 10.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Fexofenadine Related Compound B , Fexofenadine hydrochloride
- Applications
- Analysis of Fexofenadine
- Column
- ULTRON ES-CD-F
- Column Size
- 250 mm L × 4.6 mm I.D.
- Mobile phase
- Glacial acetic acid and water(2.3:2000)/CH3CN = 80/20
- Frow rate
- 0.5 mL/min
- Column temp.
- 25°C
- Injection volume
- 20.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Epinephrine
- Applications
- Analysis of Epinephrine
- Column
- ULTRON ES-CD-EP
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10mM CH3CO2NH4(pH 4.0)/CH3CN = 99/1
- Frow rate
- 0.3 mL/min
- Column temp.
- 25°C
- Injection volume
- 10.0 µL
- Diluent
- 10mM CH3CO2NH4(pH 4.0)
View detail
LC
- Samples
- Methotrexate
- Applications
- Analysis of Methotrexate
- Column
- ULTRON ES-BSA-2
- Column Size
- 150 mm L × 4.0 mm I.D.
- Mobile phase
- 50mM sodium phosphate buffer (pH6.9)/1-Propanol = 92/8
- Frow rate
- 1.5 mL/min
- Column temp.
- 25°C
- Injection volume
- 20.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Sulindac
- Applications
- Analysis of Sulindac
- Column
- ULTRON ES-BSA-2
- Column Size
- 150 mm L × 4.0 mm I.D.
- Mobile phase
- 50mM sodium phosphate buffer (pH6.9)/1-Propanol = 92/8
- Frow rate
- 0.75 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
View detail
LC
- Samples
- Ketoprofen
- Applications
- Analysis of Ketoprofen
- Column
- ULTRON ES-BSA-2
- Column Size
- 150 mm L × 4.0 mm I.D.
- Mobile phase
- 20mM sodium phosphate buffer (pH6.9)/1-Propanol/caprylic acid = 98/2/0.005
- Frow rate
- 0.75 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- 1-Propanol
View detail
LC
- Samples
- Mandelic acid
- Applications
- Analysis of Mandelic acid
- Column
- ULTRON ES-BSA-2
- Column Size
- 150 mm L × 4.0 mm I.D.
- Mobile phase
- 20mM sodium phosphate buffer (pH6.9)
- Frow rate
- 0.75 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Clopidogrel Related Compound A , Clopidogrel Related Compound B , Clopidogrel Related Compound C , Clopidogrel bisulfate
- Applications
- Analysis of Clopidogrel Related Compounds
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 10 mM KH2PO4/CH3CN = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 10.0 µL
View detail
LC
- Samples
- Clopidogrel Related Compound A , Clopidogrel Related Compound B , Clopidogrel Related Compound C , Clopidogrel bisulfate
- Applications
- Analysis of Clopidogrel Related Compounds
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 10 mM KH2PO4/CH3CN = 75/25
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 3.0 µL
View detail
LC
- Samples
- Escitalopram oxalate
- Applications
- Analysis of Escitalopram oxalate
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 50 mM KH2PO4 + 0.2 N NaOH(pH 7.0)/CH3CN = 85/15
- Frow rate
- 0.6 mL/min
- Column temp.
- 30°C
- Injection volume
- 0.5 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Cetirizine hydrochloride
- Applications
- Analysis of Cetirizine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 90/10
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Tolterodine
- Applications
- Analysis of Tolterodine
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 92/8
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tolterodine
- Applications
- Analysis of Tolterodine
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 92/8
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Prilocaine hydrochloride
- Applications
- Analysis of Prilocaine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Prilocaine hydrochloride
- Applications
- Analysis of Prilocaine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Rabeprazole sodium salt
- Applications
- Analysis of Rabeprazole sodium salt
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3OH = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Ibuprofen
- Applications
- Analysis of Ibuprofen
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3OH = 80/20
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Tolperisone hydrochloride
- Applications
- Analysis of Tolperisone hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 5.5)/C2H5OH = 95/5
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 2.0 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of Tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 1.0 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Carvedilol
- Applications
- Analysis of Carvedilol
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 7.0)/CH3CN = 75/25
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Amlodipine
- Applications
- Analysis of Amlodipine
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 90/10
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Atomoxetine hydrochloride
- Applications
- Analysis of Atomoxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 80/20
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Candesartan cilexetil
- Applications
- Analysis of Candesartan cilexetil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4/CH3CN = 75/25
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tolterodine
- Applications
- Analysis of Tolterodine
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 92/8
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Prilocaine hydrochloride
- Applications
- Analysis of Prilocaine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3CN = 95/5
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Duloxetine hydrochloride
- Applications
- Analysis of Duloxetine hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3CN = 80/20
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- mobile phase
View detail
LC
- Samples
- Rabeprazole sodium salt
- Applications
- Analysis of Rabeprazole sodium salt
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 6.0)/CH3OH = 80/20
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Ibuprofen
- Applications
- Analysis of Ibuprofen
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 (pH 4.6)/CH3OH = 80/20
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Formoterol fumarate
- Applications
- Analysis of Formoterol fumarate
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM K2HPO4 + 20 mM KH2PO4 (pH 7.0)/C2H5OH = 94/6
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Tolperisone hydrochloride
- Applications
- Analysis of Tolperisone hydrochloride
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + 20 mM K2HPO4 (pH 5.5)/C2H5OH = 95/5
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- ethanol
View detail
LC
- Samples
- Tadalafil
- Applications
- Analysis of Tadalafil
- Column
- ULTRON ES-OVM
- Column Size
- 100 mm L × 3.0 mm I.D.
- Mobile phase
- 20 mM KH2PO4 + H3PO4 (pH 3.0)/CH3CN = 85/15
- Frow rate
- 0.28 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.5 µL
- Diluent
- methanol
View detail
LC
- Samples
- Sucralose , Fructose , Glucose , Sucrose , Lactose
- Applications
- Analysis of artificial sweetener and sugars
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100mM CH3CO2NH4 (pH6.8) /CH3CN = 15/85
- Frow rate
- 1.0 mL/min
- Column temp.
- 40°C
- Injection volume
- 10.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Acesulfame K , Saccharin , Sucralose , Advantame , Neotame , Aspartame
- Applications
- Analysis of artificial sweetener
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 4.6 mm I.D.
- Mobile phase
- 100mM CH3CO2NH4 (pH6.8) /CH3CN = 10/90
- Frow rate
- 1.4 mL/min
- Column temp.
- 30°C
- Injection volume
- 4.0 µL
- Diluent
- H2O /CH3CN = 50/50
View detail
LC
- Samples
- Dehydroascorbic acid , Ascorbic acid
- Applications
- Analyses of Ascorbic acid
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 100mM CH3CO2NH4 (pH6.8) /CH3CN = 30/70
- Frow rate
- 0.2 mL/min
- Column temp.
- 30°C
- Injection volume
- 10.0 µL
- Diluent
- H2O /CH3CN = 10/90
View detail
LC
- Samples
- Amlodipine
- Applications
- Analysis of Amlodipine for LCMS
- Column
- ULTRON ES-OVM
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- 20 mM CH3CO2NH4/CH3CN = 80/20
- Frow rate
- 0.2 mL/min
- Column temp.
- 25°C
- Injection volume
- 0.4 µL
- Diluent
- H2O /CH3CN = 50/50 (v/v)
View detail
LC
- Samples
- Oligo deoxythymidine primers , Oligo dT primers
- Applications
- Analyses of Oligo deoxythymidine primers
- Column
- ULTRON AF-HILIC-CD
- Column Size
- 150 mm L × 2.0 mm I.D.
- Mobile phase
- A: CH3CN B: 100 mM CH3CO2NH4 (pH 6.7)
- Frow rate
- 0.15 mL/min
- Column temp.
- 30°C
- Injection volume
- 5.0 µL
- Diluent
- CH3CN/TE buffer* = 70/30
View detail